Pc Card; Pointing Device - Toshiba Libretto U100 User Manual

Troubleshooting

PC card

Refer also to Chapter 8,
Problem
PC card error occurs

Pointing Device

If you are using a USB mouse, also refer to the
and to your mouse documentation.
AccuPoint
Problem
Either the the
AccuPoint does not
work.
On-screen pointer
does not respond to
Pad operation
The mouse pointer
moves too fast or too
slow
9-12
Optional Devices.
Procedure
Reseat the PC card to make sure it is firmly
connected.
Make sure the connection between the external
device and the card is firm.
Check the card's documentation.
If problems persist, contact your dealer.
Procedure
Check the Device Select settings. Click start,
click Control Panel, click Printers and Other
Hardware and select Mouse icon. Open the
Mouse Properties and click Dual Pointing
Device tab. Then click the Detail Setting button
and click the Device Select tab.
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Try changing the speed setting in the mouse
control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
USB section in this chapter
User's Manual