Toshiba Regza 40XV645U Owner's Manual page 60

• Your TV remote control may not operate certain features
on your external device. Refer to the owner's manual for
your other device to determine its available features. If
your TV remote control does not operate a specific
feature on another device, use the remote control that
came with the device.
• If the TV still does not act as expected, use the Reset
Factory Defaults procedure (Il@f' page 31).
Channel tuning problems
• Make sure the remote control is set to the correct device
mode (Il@f' page 23).
• The channel may have been erased from the channel
memory by the Auto Tuning feature. Add the channel to
the channel memory (Il@f' page 28).
• The channel may be blocked by the lock feature.
Unblock the channel (Il@f' page 46).
• If you are unable to tune digital channels, check the
antenna configuration (Il@f' page 28). If you are still
unable to tune digital channels, clear all channels from
the channel list and reprogram channels into the
channel memory (Il@f' page 28). If you are still unable to
tune digital channels, use the Reset Factory Defaults
procedure (Il@f' page 31). Also see ''TV stops responding
to controls" and "Other problems" (Il@f' page 59).
Closed caption problems
• If the program or video you selected is not closed-
captioned, no captions will display.
• If text is not available, a black rectangle may appear.
If this happens, turn off the closed caption feature (Il@f'
page 40).
• A closed-caption signal may not display correctly in the
following situations: a) when a videotape has been
dubbed; b) when the signal reception is weak; or c)
when the signal reception is nonstandard (Il@f' page 40).
Rating blocking (V-Chip) problems
• If you forget your PIN code: While the PIN code entering
screen is displayed, press
~
four times within 5
seconds. The PIN code you previously stored will be
cleared (Il@f' page 43).
• The V-Chip feature is available for the U.S. V-Chip
system only (Il@f' page 44).
No REGZA-L1NK operation
• The REGZA-L1NK feature is available for Toshiba
REGZA-L1NK compatible devices.
• Make sure the HOMI cables with the HOM I Logo
(HOm.) are used.
• When the connected REGZA-L1NK device does not work
correctly after you have changed settings of the device,
turn off your TV and unplug the power cord, then plug
and turn on again.
• If several devices are connected, REGZA-L1NK feature
may not operate properly.
• Read the instruction manual furnished with the
connected REGZA-L1NK device.
I
60
HOMI problems
For HOMI cables
• Make sure the HOMI cables with the HOMI Logo
(HOm.)
are used (Il@f' page 12).
For Deep Color
• You should need to use High Speed HOMI cable to work
properly. Normal HOMI cable or OVI cable may not work
with this option (Il@f' page 15).
For Legacy HOMI source
• Some of legacy HOMI sources may not work properly
with latest HOMI TV products. due to new standard
adoption. Please try to set Off the HOM I settings (Deep
Color, Lip Sync, RGB Range, INSTAPORpM) (Il@f' page
51). Your legacy HOMI source should operate properly
with this TV products.
Media Player problems
• Make sure that devices are connected correctly.
• If you connect a USB device with separate cable or
through USB hub, the TV does not recognize the USB
device.