Toshiba 40XV733 Adjustment
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. LCD TV
  5. 40XV733
  6. Adjustment

Toshiba 40XV733 Adjustment

Hide thumbs
Table of Contents

Advertisement

Quick Links

Стр. 1 из 1
LCD Color Television
40XV733
Ver. 2.00
file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB...
07.05.2015

Advertisement

Table of Contents
loading

Related Manuals for Toshiba 40XV733

Summary of Contents for Toshiba 40XV733

  • Page 1 Стр. 1 из 1 LCD Color Television 40XV733 Ver. 2.00 file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...

  • Page 2: Service Mode

    ↓ ↓ ↓ ↓ 2. Press button again and hold button down. ↓ ↓ ↓ ↓ Service Mode display 3. While holding the button, press MENU button on TV set. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 3 Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. CAUTION: Never try to perform initialization unless you have changed the memory IC. button (on remote control) file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 4: Setting & Adjusting Data

    SETTING & ADJUSTING DATA [ SERVICE MODE ] ADJUSTING ITEMS IN THE SERVICE MODE: Item Name of adjustment R-CUT RED CUTOFF G-CUT GREEN CUTOFF B-CUT BLUE CUTOFF R-DRV RED DRIVE G-DRV GREEN DRIVE B-DRV BLUE DRIVE file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 5 +/- button will change the value of data in the range from 00H to FFH. The variable range depends on the adjusting item. Convert from Bit (Binary) to Hex The table for converting from bit (D7-D0) to hex (0x**). BIT (Binary) High nibble Low nibble file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 6 2) Select menu of MOID by pressing P or P during display of adjustment menu in the Service Mode. 3) Change MOID data into MODEL ID to initialize by pressing + or -, refer to file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 7 (OPT5) (HEX) 32XV733 0x0e 0x05 0x01 0x20 37XV733 0x0f 0x06 0x01 0x00 40XV733 0x10 SAMSUNG 0x0e 0x06 0x00 46XV733 0x11 SAMSUNG 0x0a 0x06 0x00 Initializing Data setting flowchart after replacing the Signal Unit file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 8: Test Signal Selection

    Стр. 7 из 23 Test Signal Selection Every pressing of button on the remote control changes the built-in test patterns on screen as described below in Service Mode. Picture Signal Red raster Green raster file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 9: Self-Diagnostic Function

    2. During diagnosis, the following displays are shown. * Self check displays and items are subject to the models. Item Explanation/Data Format 1 TV CPU SW Version information of TV-MICRO. Display 1 byte data. (Hex) file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 10 8 Bus Errors IIC-BUS status. None is normal. "SCL-GND" (Red indication) : SCL-GND short circuit "SDA-GND" (Red indication) : SDA-GND short circuit Block: (SCART (FULL)) (SCART (S+AV)) (Component) (Composite) HDMI1 HDMI2 HDMI3 HDMI4 file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 11 Display *.*.*.* format (* is decimal) 6 Subnet mask Current Subnet Mask. Display *.*.*.* format (* is decimal) 7 Boot Code Version Version information of boot code. Display is in the format: X.X.X.X -YYYY.MM.DD file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 12: Setting Hotel Mode

    22 Default PhotoView JPEG Status of Default picture for Photo Frame xxx.jpg : default picture is loaded : default picture is not loaded 23 CI+ Serial Number Serial Number of CI+ data 24 CI+ HOST ID HOST ID of CI+ Setting Hotel Mode file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 13: Function Description

    To move the cursor in the adjustment, press + or 1. By pressing P or P , following table data setting will change the value either 1 or 0 on selected items as follows; OPT2 OPT2 FUNCTION DESCRIPTION file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 14 ON D6 (bit6) ~ POS or VIDEO program number 0 ~ 127 [decimal] (Normal: 0) D0 (bit0) POS number: 0 ~ 99 VIDEO number: 100 ~ 127 (DTV = 100, VIDEO = 101, file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 15 Forced picture mode 0 [dec]: Auto View (Normal) D0 (bit0) 1 [dec]: Dynamic 2 [dec]: Standard 3 [dec]: Movie Setting Hotel Mode via Hotel Mode Settings Menu 1. Press button once on remote control. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 16 When Hotel Mode is on, the various options are enabled. 5. Press buttons to select the item, and then press buttons to change the setting. 6. Press [Exit] button to finish Hotel Mode setting. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 17 DTV Input 0x64 (ATV Input if DTV disabled) 101 ~ 108 External Inputs 0x65 101 (Video 1), 102 (Video 2), ...108 (PC) 0x6C Change Volume Off The last TV volume level remains OPT7, D7 file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 18 RETURN keys is enabled on HDMI/PC Input When the input source is HDMI or PC Input, RF tuning by P and RETURN keys is disabled Copying Hotel Mode Options via Hotel Clone Menu file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 19 1. Configure the hotel mode settings via Service Mode or the Hotel Mode Settings menu. 2. Enter Hotel Clone menu by following steps a - c. a. Press button once on remote control. ↓ ↓ ↓ ↓ file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 20 5. After copy is completed successfully and the message is shown, remove the USB device. Loading the Hotel Mode Settings from USB device to TV 1. Enter Hotel Clone menu as shown in previous section. 2. Select "USB to TV" by pressing buttons. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 21: Led Indications

    Green ON (solid) = The TV is turned on. OnTimer LED Green ON (solid) = The OnTimer is set. ProgrammeTimer LED Orange ON (solid) = The On timer is set. Red ON (solid) = Programme Timer recording is operating. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 22 3. Connect the USB device to the USB slot on the side panel. The following message is displayed: 4. Highlight OK and press the OK key on the remote. 5. The status is displayed during the upgrade. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 23 TV. a. After several seconds, the orange PowerOn/Standby LED and the green OnTimer LED light is on, indicating that the TV is being upgraded. b. Once the upgrade started, release the menu button. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 24 8. Disconnect the USB device. 9. Plug the TV in the AC outlet. 10. After the TV is turned on, perform Factory Reset (select "Reset TV" in the Setup Menu). Then select "Yes" to confirm reset. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 25: Function And Operation

    Стр. 1 из 3 FUNCTION AND OPERATION Remote Control file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 26 Стр. 2 из 3 file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 27 Стр. 3 из 3 file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 28 Стр. 1 из 1 FUNCTION AND OPERATION TV Front and Side Panel Controls file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 29: Tuning The Television For The First Time

    Tuning the Television for the First Time Before switching on the television, put your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 30 Стр. 2 из 3 file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 31 Стр. 3 из 3 file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 32: Safety Instruction

    LCD cover and fasten with screws. Do not strongly push on the module because any impact can adversely affect the performance. Also use caution when handling the polarized screen because it can easily be damaged. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 33 Immediately remove any type of fluid from the screen. 5. Glass is used in the panel, so do not drop or strike with hard objects. Such actions can damage the panel. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 34 Failure to do so could result in freezing of the liquid crystal due to cold air or loss of resilience or other damage. 9. Do not disassemble the LCD module. Such actions could result in improper operation. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 35 Стр. 4 из 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 36: Panel Identification

    B001A B001B 75XXXXXX LCD Panel, 32" AUO 75XXXXXX LDVS Cable for 32" LGD Panel MZ01A 75XXXXXX LDVS Cable for 32" AUO Panel MZ01B Please refer to the Parts List for correct part numbers. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 37 U02A U01A POWER MAIN U03A AC SW U03A LED LOGO U03B RMT...

  • Page 38: Safety Precaution

    6. Always use the replacement parts specified for the particular model when making repairs. The parts used in products require special safety characteristics such as file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 39 Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth ground such as a water pipe. Annex D (normative) Measuring network for TOUCH CURRENTS file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 40 - for d.c. : = 1.0 V Note: The limit values of = 0.35 V (peak) for a.c. and = 1.0 V for d.c. correspond to the values 0.7 mA (peak) a.c. and 2.0 mA d.c. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 41: Product Safety Notice

    Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement parts which do not have the same safety characteristics as specified in the parts list may create electrical shock, fire, or other hazards. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 42: Specification

    Стр. 1 из 2 SPECIFICATION file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 43 Стр. 2 из 2 file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 52: Schematic Diagram

    Unless otherwise noted in schematic, all capacitor values less than 1 are expressed in F, and the values more than 1 in pF. All capacitors are ceramic 50 V, unless otherwise noted as the following marks. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...
  • Page 53 AC volts. 5. Waveforms are taken receiving color bar signal with enough sensitivity. 6. Voltage reading shown are nominal values and may vary ±20 % except H.V. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 06.05.2015...

  • Page 177: Parts List

    75012560 CAPACITOR, CERA CHIP, 10V JB 104K 1005 SIZE, C1005JB1A104KT U01AS MAIN (PE0840) C1070 75012560 CAPACITOR, CERA CHIP, 10V JB 104K 1005 SIZE, C1005JB1A104KT U01AS MAIN (PE0840) C1071 75012560 CAPACITOR, CERA CHIP, 10V JB 104K 1005 SIZE, C1005JB1A104KT file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 178 75012560 CAPACITOR, CERA CHIP, 10V JB 104K 1005 SIZE, C1005JB1A104KT U01AS MAIN (PE0840) C1070 75012560 CAPACITOR, CERA CHIP, 10V JB 104K 1005 SIZE, C1005JB1A104KT U01AS MAIN (PE0840) C1071 75012560 CAPACITOR, CERA CHIP, 10V JB 104K 1005 SIZE, C1005JB1A104KT file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 179 U02A KEY (PE0720) SA03 75014688 SWITCH, KGS6N4252BT U02A KEY (PE0720) SA04 75014688 SWITCH, KGS6N4252BT U02A KEY (PE0720) SA05 75014688 SWITCH, KGS6N4252BT U02A KEY (PE0720) SA06 75014688 SWITCH, KGS6N4252BT U02A KEY (PE0720) SA07 75014688 SWITCH, KGS6N4252BT file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 180 U03A LED (PE0829) R743 75018007 RESISTOR CHIP RES 1/10W 432J (1608), CR16-432JV U03A LED (PE0829) R744 75018007 RESISTOR CHIP RES 1/10W 432J (1608), CR16-432JV U03A LED (PE0829) R746 75014591 JUMPER, CHIP(1608), 1A, CR16-000V file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 181 75014720 RESISTOR, CHIP(1608), 1/10W 472J, CR16-472JV U03B RMT (PE0829) R732 75014728 RESISTOR, CHIP(1608), 1/10W 563J, CR16-563JV U03B RMT (PE0829) R748 75014712 RESISTOR, CHIP(1608), 1/10W 470J, CR16-470JV U03B RMT (PE0829) R749 75014712 RESISTOR, CHIP(1608), 1/10W 470J, CR16-470JV file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 182 S801 75018012 SWITCH ROCKER, SDDJF10900 Miscellaneous U500 75018011 LAMP LED LIGHTING MODULE, SMOP-B1/RZ01 Miscellaneous U800 75018115 P0WER UNIT, SRV2209WW Miscellaneous W661 75016291 SPEAKER, SPK1516AG, 35X160 8-OHM 10W Miscellaneous ZA04 23103839 FERRITE CORE, TFE1012 file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 183 Y114 75018117 MANUAL ITA SCHEMATIC DIAGRAM WL753, ITA SCHEMA WL753 Accessory Y130 75018021 REMOCON HAND UNIT CT-90344 FOR RV733, CT-90344 Accessory Y135 75015010 MANUAL, UK HELPLINE SHEET Accessory Y186 75009788 CLOTH, CLEAN, XF350P file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 184 75018114 FRONT BEZEL ASSY, FOR SERVICE Cabinet A401 75018040 CABINET/RACK BACK COVER ASSY, BACK COVER ASSY Cabinet A421 75014428 BRACKET ASSY, STAND Cabinet A422 75018044 BASE ASSY, STAND, SW Cabinet A425 75010937 TOOL SET, STAND file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 185 75018042 PAD TOP PACKING, TOP PACKING Packing A702B 75018043 PAD BOTTOM PACKING, BOTTOM PACKING Packing A702C 75018018 PAD CENTER PACKING T, CENTER PACKING T Packing A702D 75018038 PAD CENTER PACKING BTM, CENTER PACKING BTM file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 186 Abbreviations Capacitors CD : Ceramic Disk Resistors : Carbon film OMF : Oxide Metal Film : Plastic Film : Carbon Composition : Variable Resistor : Electrolytic : Metal Film file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...
  • Page 187 Стр. 2 из 2 : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://D:\Documents and Settings\Admin\Рабочий стол\40XV733 Ver. 2.00\TOSHIB... 07.05.2015...

Table of Contents