Connecting A Digital Audio System; Connecting An Audio System - Toshiba 26AV500U Owner's Manual

Connecting a digital audio system
The TV's DIGITAL AUDIO OUT terminal outputs a Dolby®*
Digital
~P~D,D~~vi
or 2-channel down-mixed peM (pulse-code
modulation) signal for use with an external Dolby® Digital
decoder or other external audio system with optical audio
input.
You
will
need:
• optical audio cable (Use an optical audio cable that has
the larger "TosLink" connector and not the smaller "mini-
optical" connector.)
o
o
Dolby Digital decoder or
other digital audio system
I
LINE IN
II
Oplical
L A
Audio IN
~ ~
1Q1.
o
o
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are not
compatible with standard optical out signals may not work
properly, creating
a
high noise level that may damage
speakers. THIS DAMAGE IS NOT COVERED BY YOUR
WARRANTY
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
*
Manufactured under license from Dolby Laboratories. Dolby,
and the double-D symbol are registered trademarks of Dolby
Laboratories.
Connecting an audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
You
will
need:
• standard audio cables
To control the audio:
1
Tum on the TV and the digital audio device.
2
Press
MOU
on the TV's remote control and open the Audio
menu.
3
In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device
(I@'
"Selecting the optical audio output format" on
page 38).
Analog audio amplifier
o
o
To control the audio:
18
Setup
Prefer
Language
Bass 10
Trel?le 10
Balance 0
English ..
1
Tum on the TV and the stereo amplifier.
2
Set up a optimum volume level of the stereo amplifier.
Then you can adjust the sound volume level from the
TV's volume control or the amplifier's volume control.
3
Menu item of Speakers can tum to OFF to mute the TV's
built in speakers.