Chapter 6: Using The Tv's Features; Selecting The Video Input Source To View - Toshiba Regza 40XV645U Owner's Manual

Selecting the video input source
to view
To select the video input source to view:
1 Press ~ on the remote control or TV control panel.
2
And then either:
a) Press 0-8; or
b) Repeatedly press'" or T on the remote
control and then press
@
to change the input;
or
c) Repeatedly press
~
on the remote control
or TV control panel to change the input.
Inputs
(!)
ANT/CABLE
O~(d~o1
'.' " •
. '@Vlded2 . . . .
'E)
Col()rStrearn H01' .
. 0
Cj:l!or'Stream'H02
.
08(>MI:~
j;iNWli!3 .. ' . • '; ...' .
0 H D M l i ' .
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(UE "Labeling video input sources" on page 29).
• Sources can also be skipped (UE "Setting video input
skip" on page 29).
• Inputs that are set to skip will be grayed out and will be
skipped over only when selecting inputs by repeatedly
pressing~,
• If one or more REGZA-LlNK@ devices are connected to
an HOMI input, the REGZA-LlNK@ icon will appear. In
this case, the label (UE page 29) will not appear in the
input selector.
I
32
To select a REGZA-LINK® device:
1 Press ~ or
'Y to highlight an appropriate HOMI
input
2 Press ~ to display the list of REGZA-LINK® devices
for that input
3
If there are multiple REGZA-LINK® devices on the
input, use ~ or
'Y
to highlight a particular device.
4
Press
8
to select the device and change input