Connection To Pc - Philips 200BW8ES/00 Service Manual

1. Connection to PC

Please follow the steps to connect your LCD Monitor to PC.
a. Assembly LCD Monitor with base
b. Connect to PC
1). Turn off your computer and unplug its power cable.
2). Connect the monitor signal cable to the video connector
on the back of your computer.
3). Plug the power cord of your computer and your monitor
Into a nearby outlet.
4). Turn on your computer and monitor. If the monitor
displays an image, installation is complete.
1
Port definition:
(1) AC power input
(2) DVI-D input
(3) VGA input
(4) Kensington anti-thief lock
(5) PC audio input
Set your Monitor at 1680*1050@60Hz for best performance.
It is also strongly recommended to use DVI input(may require
the optional DVI cable) for the ture digital enjoyment.
c. Accessory Pack
Power cord VGA cable
DVI cable (Optional)
Audio cable
Connection to PC
1 2 3 5
4
EDFU CD
2. Function key definition
200BW
(1) To switch monitor's power on and off
(2) To access OSD menu
(3) Hot key of contrast adjustment and to adjust OSD
value up when OSD menu is active
(4) Hot key of brightness adjustment and to adjust OSD
Value down when OSD menu is active
(5) Automatically adjust the horizontal position, vertical
position, phase and clock settings
3. Description of the On Screen Display
On-Screen Display(OSD) is a feature in all Philips LCD
monitors. It allows and end user to adjust screen performance
or select functions of the monitors directly through an on-screen
instruction window. A user friendly on screen display interface is
shown as below:
Basic and simple instruction on the control keys.
According to the above OSD structure, users can :
press < or > buttons to move the cursor,
press MENU button to confirm the choice or change,
press < or > button to adjust the value,
press MENU button to save the changes.
press AUTO button to automatically adjust the horizontal
position, vertical position, phase and clock setting.
200BW8 LCD
5