Philips 200BW8ES/00 Service Manual page 14

14
200BW8 LCD
9. Take out the lamp cable shielding and undo the lamp cable.
10. Tear off the adhesive tape and undo the LVDS cable.
11. Separate the panel and shielding
Mechnical instructions
12. Release the four hexagonal screws.
13. Take out the protect film and release the four screws from
power board, then release the three screws from the main
board.
14. Separate the connect cable between main board and
power board, then take out the connect cable from main
board.(note: be careful of the jack, don't do it forcibly.)