Related Manuals for Philips 200S5
Summary of Contents for Philips 200S5
- Page 1 200S5 www.philips.com/welcome EN User manual Customer care and warranty 15 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
4.1 Resolution & Preset Modes ..13 5. Power Management ....14 6. Customer care and warranty .. 15 6.1 Philips’ Flat Panel Monitors Pixel Defect Policy ...... 15 6.2 Customer Care & Warranty ..18 7. Troubleshooting & FAQs ..19 7.1 Troubleshooting ......19... -
Page 3: Important
• Please use approved power cord The Philips guarantee applies provided provided by Philips all the time. If the product is handled properly for your power cord is missing, please its intended use, in accordance with... - Page 4 1. Important off immediately and disconnect the Service power cord. Then, remove the for- • The casing cover should be opened eign substance or water, and send it only by qualified service personnel. to the maintenance center. • If there is any need for any docu- • Do not store or use the monitor in ment for repair or integration, locations exposed to heat, direct...
-
Page 5: Notational Descriptions
1. Important 1.2 Notational Descriptions 1.3 Disposal of product and packing material The following subsections describe notational conventions used in this Waste Electrical and Electronic document. Equipment-WEEE Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. - Page 6 From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation innational take- back initiatives and recycling programs whenever possible, preferably in...
-
Page 7: Setting Up The Monitor
User’s Manual 保留备用 Monitor drivers 3. Hold the monitor base stand with Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. both hands and firmly insert the * CD base stand into the base column. -
Page 8: Operating The Monitor
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Front view product description AC power input VGA input DVI-D input Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. - Page 9 Sub menu What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in Input all Philips LCD monitors. It allows an end user to adjust screen performance or Wide Screen, 4:3 Picture Format select functions of the monitors directly...
-
Page 10: Remove Base Stand
2. Setting up the monitor Resolution notification 2.3 Remove Base Stand This monitor is designed for optimal Remove the Base Stand performance at its native resolution, 1920×1080@60Hz. When the monitor Before you start disassembling the is powered on at a different resolution, monitor base, please follow the an alert is displayed on screen: Use instructions below to avoid any possible... - Page 11 2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. 100mm 100mm Caution For use only with UL Listed Wall Mount Bracket with minimum weight/load 3.5Kg...
-
Page 12: Image Optimization
3. Image Optimization 3. Image Optimization 3.1 SmartContrast What is it? A unique technology that dynamically analyzes displayed content and automatically optimizes an LCD monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. -
Page 13: Technical Specifications
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type MVA LCD Backlight Panel Size 19.53" W (49.6cm) Aspect Ratio 16:9 Pixel Pitch 0.23X0.22mm SmartContrast 10,000,000:1 SmartResponse 8ms(GtG) Optimum Resolution 1920×1080@60Hz Viewing Angle 178° (H) / 178° (V) @ C/R > 10 Display Colors 16.7M Vertical Refresh Rate... - Page 14 Energy Star(The regulations may differ depending on your country) Compliance and standards Regulatory Approvals CCC, WEEE Cabinet Color Black Finish Glossy/Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 15: Resolution & Preset Modes
4. Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution 1920 × 1080 @ 60 Hz (analog input) 1920 × 1080 @ 60 Hz (digital input) Recommended Resolution 1920 × 1080 @ 60 Hz (digital input) H. freq Resolution V. freq (Hz) (kHz) 31.47 720 ×... -
Page 16: Power Management
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 17: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced manufacturing... - Page 18 Black dot defects appear as pixels or the warranty period, a TFT Monitor sub pixels that are always dark or 'off'. panel in a Philips flat panel monitor That is, a dark dot is a sub-pixel that must have pixel or sub pixel defects...
- Page 19 6. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
-
Page 20: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 21: Troubleshooting & Faqs
• Disconnect the monitor from mains • First, ensure that the power button power source immediately for safety on the front of the monitor is in the • Contact with Philips customer OFF position, then press it to the service representative immediately. ON position. -
Page 22: General Faqs
For further assistance, refer to the An "after-image", "burn-in" or "ghost Consumer Information Centers list image" remains after the power has and contact Philips customer service been turned off. representative. • Uninterrupted display of still or static images over an extended period may cause "burn in", also known as... - Page 23 When handling the reconnect your Philips LCD monitor. monitor, make sure that there is • Turn on your monitor and then turn no pressure or force applied to the on your PC.
- Page 24 Q9: Can I connect my LCD monitor to covered under your warranty. any PC, workstation or Mac? Ans.: Yes. All Philips LCD monitors are Q12: Why is my Display not showing fully compatible with standard sharp text, and is displaying jagged PCs, Macs and workstations.
- Page 25 © 2017 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice. Version: M5200S1T...