Connection To Pc - Philips 200WP7EB/00 Service Manual

Installing Your LCD Monitor
Front View Product Description
1 To switch monitor's power On and Off
2 To access OSD menu
3 To adjust the OSD
4 To adjust brightness of the display
5 To adjust the OSD
6 Automatically adjust the horizontal position,
AUTO
vertical position, phase and clock setting
Rear View
1 AC power input
2 DVI-I input
3 D-SUB Input
4 Kensington anti-thief lock
5 USB upstream and downstream
Connect to PC
Connect the power cord and DVI cable to the back of the monitor firmly.
(Philips has pre-connected VGA cable for the first installation.)

Connection to PC

Connect the cables to the back of your computer by following these
steps:
(a)Turn off your computer and unplug its power cord.
(b)Connect the monitor signal cable to the video connector on the back
of your computer
(c)Plug the power cord on your computer and your monitor into a nearby
outlet.
(d)USB plug
(1)
(2)
(e)Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
Note:
support USB 1.1 or USB 2.0 depends on your PC's specification
Connect USB upstream port on monitor and the USB port on PC
with a USB cable.
The USB downstream port is now ready for any USB device to
plug in
The USB plug is a pass through connection whether it can
5
200WP7 LCD
Go to cover page