10.1
Safety approvals
CB report
CE
TUV GS
TCO'03
10.2
Power management
10.3
Certificates, Reports for the production start
When the first production of the monitor starts the following documents must be sent to Philips by mail. All
reports must be raised under "Philips" and have to show W0ZR model name .
CB report
CE
FCC
Service manual
11
RELIABILITY
11.1
Reliability of the monitor
The MTBF of the monitor has to be greater than 50.000 hours. The MTBF shall be calculated according to
the MIL Standard HBDK 217 E/F. The report about the calculation detail shall be provided on component
level before mass- production by TVI. The calculation shall be performed for a primary test/preset mode
under ambient temperature of 25°C.
12.
CUSTOMIZATION
12.1
Identity Customization
Refer to SKU
12.2
EAN /SAP Identification
Refer to SKU
12.3
Plastic
The plastic material of the monitor must be PC-ABS (Front/ back) ABS-HB (base).
Plastic type and color is released as follows:
Refer to MakeUp sheet/ Graphic sheet
12.4
Definition of serial number
Refer to Philips' definition
12.5
Definition of the barcode label
Energy Star
200BW8 LCD
81