Connection To Pc,Front Control - Philips Hudson2 200P3 Service Manual

Connect to PC
Philiips has pre-connected VGA cable for the first installation.
Connect power cord, VGA, DVI, microphone and audio cables onto rear of
monitor firmly
If you use an Apple Macintosh
to one end of the monitor signal cable.
Connect the cables to the back of your computer by following steps
(a) Turn off your computer and unplug its power cord.
(b) Connect the VGA or DVI cable to video connector.
(c) Connect the microphone and audio cables.
(d) Plug the power cord of computer and monitor into a nearby outlet.
(e) Turn on your computer and monitor. If the monitor displays an image,
installation is complete.

Connection to PC,Front Control

TM , you need to connect the special Mac adapter
Connect to DVD/VCR/VCD
Connect to Microphone and Earphone
Hudson2 200P3
Go to cover page
5