Philips 200P7ES/00 Service Manual

20.1" lcd monitor

Hide thumbs Also See for 200P7ES/00:

User manual (99 pages)

Quick start manual (1 page)

Specifications (3 pages)

100

101

102

103

104

105

106

107

Table of Contents

Quick Links

Chapters

Table of Contents

Summary of Contents for Philips 200P7ES/00

Page 1: Table Of Contents
Chassis: UH7 20.1" LCD Monitor Service 200P7ES/00 Service 200P7EG/00 200P7EB/00 Service 200P7EB/27 200P7EB/75 200P7EB/93 200P7MG/00 Horizontal frequencies 30-98KHz TABLE OF CONTENTS Description Page Description Page Electrical Instructions-------------------------------31~32 Important Safety Notice ----------------------------------2 Repair Tips--------------------------------------------33~34 Technical Data------------------------------------------3~4 « Repair Flow Chart------------------------------------35~36 Connection to PC------------------------------------------5...
Page 2: Important Safety Notice
TO ENSURE THE CONTINUED RELIABILITY OF THIS Company** Equipment. The service procedures PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S recommended by Philips and described in this service REPLACEMENT PARTS, WHICH ARE LISTED WITH manual are effective methods of performing service THEIR PART NUMBERS IN THE PARTS LIST SECTION operations.
Page 3: Technical Data
Destination : US*.CA*. Z9 Sense (GND) 1.3. Basic data 1.3.1 LCD panel : LPL Cable detect (GND) Type NR. : LM201U04 (LG.PHILIPS) Red GND Outside dimensions : 432.0(w)*331.5(h)*25(d) (Typ) mm Green GND Pitch ( mm ) : 0.255 (per one triad) x 0.-255mm...
Page 4: Technical Data
Technical Data 200P7 LCD Go to cover page TMDS clock shield TMDS clock+ TMDS clock- Analog R Analog G Analog B Analog H-sync Analog GND (Analog R, G, B return) Signal interface 15Pins, D-sub male with DDC2B Pin assignments 29Pins, DVI-I male with DDC2B Pin assignments Sync polarity -Hori.sync positive/negative...
Page 5: Connection To Pc
USB 1.1 or USB 2.0 depends on your PC's specification 5 USB upstream and downstream Connect to PC Connect the power cord and DVI cable to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation.)
Page 6 Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance of the monitors directly through an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor.
Page 7 On Screen Display 200P7 LCD Go to cover page Only available for Europe Model Main Menu Sub Menu Exit Brightness&Contrast Brightness Contrast Back Color Original Color 9300K 6500K sRGB User Define Green Blue Back Position&Size Position Horizontal Vertical Size Full Screen Native Mode Fill With Aspect Back...
Page 8 On Screen Display 200P7 LCD Go to cover page Only available for Nafta Model Main Menu Sub Menu Exit Brightness&Contrast Brightness Contrast Back Color Original Color 9300K 6500K sRGB User Define Green Blue Back Position&Size Position Horizontal Vertical Size Full Screen Native Mode Fill With Aspect Back...
Page 9 On Screen Display 200P7 LCD Go to cover page Only available for Asia Pacific Model Main Menu Sub Menu Exit Brightness&Contrast Brightness Contrast Back Color Original Color 9300K 6500K sRGB User Define Green Blue Back Position&Size Position Horizontal Vertical Size Full Screen Native Mode Fill With Aspect...
Page 10: Safety Test Requirement
200P7 LCD Go to cover page 3. Equipments and Connection All units that are returned for service or repair must pass the original manufactures safety tests. Safety testing requires both Hipot Ground Continuity testing. 3.1. Equipments For example : HI-POT TEST INSTRUCTION - ChenHwa 9032 PROGRAMMABLE AUTO SAFETY TESTER 1.Application requirements...
Page 11: Aging Mode/Osd Lock/Unlock
200P7 LCD Go to cover page Front View WAIT FOR AUTOMATIC ADJUSTMENT This screen appears when you press the "AUTO" buttons at the same time. It will disappear when the monitor is properly adjusted ATTENTION SIGNAL WAITING FOR AUTOMATIC ADJUSTMENT Access Aging..
Page 12: Factory Mode
200P7 LCD Go to cover page Front Control Panel Access Factory Mode How to get into Factory Mode Menu Step1: Turn off monitor. Step2: [Push " " & " " buttons at the same time and hold it] +[Press power " "...
Page 13: Definition Of Pixel Defects
Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in the following tables.
Page 14: Panel Failure Mode
Failure Mode Of Panel 200P7 LCD Go to cover page Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel.
Page 15: On-Screen Display(Osd)
200P7 LCD Go to cover page This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Common Problems Having this problem Check these items ·...
Page 16 Green, red, blue, dark, and white dots remains The remaining dots are normal characteristic of the liquid crystal used in today’ s technology For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative...
Page 17: Mechanical Instructions
Mechanical Instructions 200P7 LCD Go to cover page 1.Back view as Fig.1 Fig.1 Fig.6 3. Remove cable base as Fig7 and Fig.8 2.remove the base - Step 1: Place the monitor face down on a smooth surface as Fig 2. Be carefully to prevent the scratch and injury during the uninstallation.
Page 18 Mechanical Instructions 200P7 LCD Go to cover page Fig.11 Fig.15 8. Remove the control board 6.Remove the power board and scaler board -unscrew the screws and disconnect the connector as Fig.16 -unscrew the screws and disconnect the connectors as Fig.13,Fig.14 Fig.16 Fig.13 Fig.14...
Page 19: Display Adjustment
Display Adjustment 200P7 LCD Go to cover page TO access factory mode 2. Apply a 1280x1024/60Hz signal with white pattern.Set 1. Turn off monitor(do not turn off PC) 2. Press AUTO , OK and the power simultaneously on the frond control brightness control at 100% and contrast control at 50%.
Page 20: Display Adjustments
Display Adjustment 200P7 LCD Go to cover page 2.9 Adjust the R, G, B Sub-Gain on factory mode for the screen center, the 1931 CIE chromaticity (X, Y) co-ordinates shall be as follows. 9300°K 6500°K 0.283 ± 0.005 0.313 ± 0.005 x (center) 0.297 ±...
Page 21: Ddc Instructions & Ddc Data
DDC Instructions 200P7 LCD Go to cover page General Pin Assignment DDC Data Re-programming In case the DDC data memory IC or main EEPROM which storage all factory settings were replaced due to a defect, the serial numbers have Fig. 3 Fig.
Page 22 200P7 LCD Go to cover page Configuration and procedure 3. At the submenu, type the letter of your computer's hard disk drive followed by :EDID45 (for example, C:\EDID45, as shown in Fig. 7). There are 3 chips contained OSD string, serial number..etc on the circuit board, main EEPROM which storage all factory settings,OSD string.
Page 23 DDC Instructions 200P7 LCD Go to cover page To Printer port To Printer port DC 8~12V DC 8~12V DC 8~12V DC 8~12V To Monitor To Monitor D-sub/DVI cable D-sub/DVI cable To Monitor To Monitor D-sub cable D-sub cable Power Power indicator indicator Power...
Page 24 DDC Instructions 200P7 LCD Go to cover page Step : 8 Modify serial number in OSD 2. Access Factory Mode -1. Unzip the serial number.zip to your computer, then open the folder as shown in Fig.20. - Turn off monitor. -2.
Page 25 DDC Instructions 200P7 LCD Go to cover page Step 3: Modify DDC data (verify EDID version, week, year) Re-programming Digital DDC IC Step 1: After initialize alignment box, connecting all cables and Click (new function) icon from the tool bar, bring up box as shown in Fig.
Page 26 1. Configuration should be as Fig. 31. And press OK. BZ000501000001 SERIAL NO YEAR/WEEK BZ CODE(TY--CHUNGLI,VN--HUNGARY(SZR), BZ--SUZHOU,DS--DONG GUAN) According to the ECO-CA005743,serial number definition of 200P7ES/00,200P7EB/00,200P7EB/27,200P7EB/75 has been changed like below: BOM Code Fig. 31 Panel Supplier CODE 2. Access Factory Mode - Turn off monitor.
Page 27: Ddc Data
: TY 123456 Red Y coordinate : 0.342 Monitor Descriptor #3 Green X coordinate : 0.293 Monitor Name : Philips 200P Green Y coordinate : 0.609 Monitor Descriptor #4 Blue X coordinate : 0.147 Monitor Range Limits Blue Y coordinate : 0.068...
Page 28 Display Type : RGB color display Monitor Descriptor #3 Standard Default Color Space : Primary color space Monitor Name : Philips 200P Preferred Timing Mode : Detailed timing block 1 Monitor Descriptor #4 Color Characteristics Monitor Range Limits Red X coordinate : 0.638...
Page 29: Firmware Upgrade For Cpu
ISP Instruction 200P7 LCD Go to cover page Double click the shortcut on the desktop Configuration and procedure "Easywriter " The software is provided by Novatek to upgrade the firmware of CPU. It is a windows-based program, which cannot be run in MS-DOS. The tool (3138 106 10396) is for the interface between "Parallel Port of PC"...
Page 30 ISP Instruction 200P7 LCD Go to cover page Press the file exit to end program, as shown in Fig.9 Fig.9 If there is a warring message coming as shown in Fig 10. , you have to check the AC power, Video cable, or Novatek MCU. You can enter factory mode to confirm the CPU version...
Page 31: Electrical Instructions
Electrical instructions 200P7 LCD Go to cover page General points (2) Preset Modes (36modes) Item H.Freq. Mode Resolutio V.Freq. (KHz) (Hz) During the test and measuring, supply a distortion free AC mains voltage to the apparatus via an isolated transformer with 31.469 IBM VGA 10H 640x350...
Page 32: Electrical Instructions
Electrical instructions 200P7 LCD Go to cover page Remark : Mode 35:/ 36 1600 * 1200 70 Hz and 75Hz only supported by analog signal , DVI can’ t support these mode AC, DC power board Setup the AC I/P at 90VAC, and 18V panel loading 0.25A, the voltage is 18V +/- 0.9V, inverter 18V loading 1.8A, the output voltage is 18V +/- 0.9V, 5V loading 1.2A, the DC output voltage is 5V +/-0.25VDC,...
Page 33: Repair Tips
Repair Tips 200P7 LCD Go to cover page 0. Warning preferably be equipped with a thermal control (soldering temperature: 225 to 250 C). All ICs and many other semi-conductors are susceptible to - The chip, once removed, must never be reused. electrostatic discharges (ESD).
Page 34: Repair Tips
200P7 LCD Go to cover page 3. Lead-free product identification You can identify lead-free product by Philips-lead-free logo on PCB. 4. Lead-free product repair instruction 4.1 Use only lead-free Solder Alloy 0622 149 00106(1.2mm SAC305) or 0622 149 00108(1.0mm SAC305).
Page 35: Repair Flow Chart
Repair Flow Chart 200P7 LCD Go to cover page AC IN Power Board Control Board Scaler Board LCD Panel No power (power indicator off) Check 12V/5V/3.3V Bad power board Bad Scaler Board Check Scaler Board Check Control Board Check Control Wires Check LCD Panel...
Page 36 200P7 LCD X 21 Repair Flow Chart Go to cover page Bad Power Board Power Board Check Power Board Check LCD Panel Check Scaler Board Bad Scaler Board Control Board Board...
Page 37 Wiring Diagram 200P7 LCD Go to cover page...
Page 38: Wiring/Block Diagram
200P7 System Block Block Diagram 200P7 LCD Go to cover page Panel Backlight (3 CCFL Panel • 30 Pin wire harness(LVDS) Panel Vcc(18V for RGB//DE/Hsync/Vsync LPL , 5V for AU) Connector Connector Connector Connector AC-DC Power supply Inverter and Connector DC-DC converter 30 pin wafer Scalar(LVDS interface)
Page 39: Scaler Diagram & C.b
200P7 LCD Go to cover page...
Page 40 200P7 LCD Go to cover page...
Page 41 200P7 LCD Go to cover page...
Page 42 200P7 LCD Go to cover page...
Page 43 200P7 LCD Go to cover page...
Page 44 200P7 LCD Go to cover page...
Page 45 200P7 LCD Go to cover page...
Page 46 200P7 LCD Go to cover page...
Page 47: Power Diagram & C.b
200P7 LCD Go to cover page...
Page 48 200P7 LCD Go to cover page...
Page 49 200P7 LCD Power PCB C.B.A Go to cover page...
Page 50 200P7 LCD Go to cover page...
Page 51: Usb Diagram & C.b
200P7 LCD Go to cover page...
Page 52 200P7 LCD Go to cover page...
Page 53 200P7 LCD Go to cover page...
Page 54 200P7 LCD Go to cover page...
Page 55: Control Diagram & C.b
200P7 LCD Go to cover page To Printer port DC 8~12V DC 8~12V To Monitor D-sub/DVI cable To Monitor D-sub cable Power indicator Power indicator To Printer port...
Page 57 200P7 LCD Go to cover page...
Page 58: Exploded View
Exploded View...
Page 59: General Product Specification
. CE ENVIRONMENTAL POLICY . ANTI-GLARE TO REDUCE LIGHT REFLECTION . POWER MANAGEMENT CAPABILITY . SOG SUPPORT . TCO 03 / TCO 95 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 60 Visual characteristics Test conditions Resolution Brightness Image size 4.4.1 Actual display size 4.4.2 Max. scan size Brightness uniformity Cross-talk White color adjustment 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 61 Display disturbances from external environment Display disturbances to external environment 6.4.1 Reliability Mean time between failures Quality assurance requirements Acceptance test Serviceability 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 62 30 minutes that brightness stability is optimal, and follow strictly after panel specification. PRODUCT PROFILE This display monitor unit is a color display monitor enclosed in PHILIPS global styling cabinet which has an integrated tilt and swivel base. LCD Panel : LPL Type NR. : LM201U04 (LG.PHILIPS) Outside dimensions: 432(w)*331.5(h)*25(d) (Typ) mm...
Page 63 (1) D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync (2) DVI digital Panel Link TMDS input Ambient temperature : 0 °C - 35 °C 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 64 Composite sync TTL level, input impedance 5k ohm terminate (Positive/Negative) Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive) 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 65 Blue Sense (GND) Cable detect Red GND Green GND Blue GND DDC +5V Sense (GND) Bi-directional data H/H+V sync V-sync Data clock 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 66 TMDS data1- TMDS data1+ TMDS data1 shield Ground(return for +5V and H/V-sync) Hot plug detect TMDS data0- TMDS data0+ TMDS data0 shield 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 67 All display adjustments will be performed by using an On Screen Display (OSD) in conjunction with controls on the front of the monitor. The specification of OSD window is as below: 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 68 Go to cover page SmartImage OSD outlook Philips SmarImage feature enriches your photo and video experience with preset modes ideal for your favorite applications: Office Work, Internet, Image Viewing, and Video Playback. The SmartImage engine optimizes luminance, contrast gap, color boost, sharpness, and text enhancement for photos and skin tone for videos.
Page 69 Sharpness Text Enhancement vii. Reset to adjacent sub-menu selections Then, press OK to go back to sub-menu and SmartImage OSD. " " 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 70 200P7 LCD GENERAL PRODUCT SPECIFICATION Go to cover page Off: No optimization by SmartImage. 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 71 OSD language is by different region Europe model (/00) : English, Spanish, French, German, Italian, Russian. Nafta/LA models (/27) : English, Spanish, French, Portuguese, S-Chinese. 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 72: General Product Specification
200P7 LCD GENERAL PRODUCT SPECIFICATION Go to cover page 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 73 0.062(3 lines) line ) SYNC. H/V + / + + / + + / + - / - POLARITY SEP . SYNC 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 74 Remark : Mode 14:/ 15 1600 * 1200 70 Hz and 75Hz only supported by analog signal , DVI can’ t support these mode. 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 75 3.6.2 In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC 2B and EDID 3.0 structure 2.0 Visual characteristics 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 76 Remark : Mode 14:/ 15 1600 * 1200 70 Hz and 75Hz only supported by analog signal , DVI can t support these mode. Brightness : >=200 nits (at panel color temperature, at center of the screen, set contrast and brightness at maximum. ) 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 77: Tft Uxga Lcd Monitor (Hudson7-200P) Type :200P7Es/00
Y = 0.297 +/- 0.020 6500K/ sRGB CIE coordinates X = 0.313 +/- 0.020 Y = 0.329 +/- 0.020 Mechanical characteristics Controls 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 78 : 551(W) X 277(H) X 520(D) mm Gross weight : 10.0 KG 5.4.2 Block unit / Palletization layers/ block sets/ layer sets/ block unit 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 79 10-55-10, 0.35 mm amplitude, 30 min. /axis. 3axes Electrical function ok Test Test Mechanical function ok Result No serious damage on set appearance 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 80 The serviceability of this monitor should fulfill the requirements which are prescribed in UAW-0346 and must be checked with the check list UAT-0361. 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 81 Total bright or black dot defects of all types 5 or fewer *Note: 1 or 2 adjacent subpixel defects= 1 dot defect 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 82 GENERAL PRODUCT SPECIFICATION 200P7 LCD Go to cover page Fig 1: Brightness Uniformity L/10 W/10 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 83 Fig 2: Cross talk pattern Gray level 46 (64 Gray level) Fig 3: Cross talk Pattern Center at Gray level 0 (Black) 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 84: General Product Specification
GENERAL PRODUCT SPECIFICATION Go to cover page SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-4 TIMING CHART -1 20.1" TFT UXGA LCD MONITOR (HUDSON 7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 85: (Hudson7-200P) :200P7Es/00
GENERAL PRODUCT SPECIFICATION Go to cover page VIDEO VERTICAL COMPOSITE SYNC. & VIDEO ( SYNC. ON GREEN ) HORIZONTAL VERTICAL FIG-5 TIMING CHART -2 20.1" TFT UXGA LCD Monitor (HUDSON7-200P) 8639 000 16916 TYPE :200P7ES/00 BRAND : PHILIPS 2005-12-02 Jerry Chen 2005-12-02...
Page 86: Recommended/Spare Parts List
200P7 LCD Recommended Parts List Go to cover page 0030 313815760851 FRONT BEZEL ASSY 0031 313815417351 BEZEL 0032 313815417341 BEZEL -DECO 0033 313815417361 CONTROL KNOB 0034 313815417711 OSD INSULATE PLATE 0040 313815760861 BACK COVER ASSY 0041 313815417381 BACK COVER 7101 935270037112 IC TEA1533AP/N1 (PHSE) L 7102...
Page 87: 200P7 Lcd
200P7 LCD Model:200P7ES/00(LPL PANEL) 1955 243812800196 SWI TACT H=5 GY 160G SKHHAM B 2401 202203100205 ELCAP SM RVS 25V 47U PM20 R Mechanical Parts 1956 243812800196 SWI TACT H=5 GY 160G SKHHAM B 2402 223878615649 CER2 0603 X7R 16V 100N PM10 R...
Page 88: Go To Cover Page
200P7 LCD Go to cover page 3252 212211805638 RST SM 0603 RC0603 33R PM5 R 3523 232270260103 RST SM 0603 RC21 10K PM5 R 2704 223878615649 CER2 0603 X7R 16V 100N PM10 R 3253 212211805964 RST SM 0603 RC0603 75R PM1 R 3524 212211805683 RST SM 0603 RC0603 100K PM5 R 2705...
Page 89 200P7 LCD 5708 242254945579 IND FXD 1206 EMI 100MHZ 100R R 3634 232270260202 RST SM 0603 RC21 2K PM5 R 223891015649 CER2 0805 X7R 25V 100N PM10 R 2808 3681 212211805672 RST SM 0603 RC0603 15K PM5 R 5710 242254945579 IND FXD 1206 EMI 100MHZ 100R R 202203100068 ELCAP GL 25V S 470U PM20 B 2809...
Page 90 200P7 LCD Go to cover page 3810 232273463303 RST SM 0805 RC12H 33K PM1 R 6810 932205042685 DIO SIG SM BAV99LG (ONSE) R 3811 232273461003 RST SM 0805 RC12H 10K PM1 R 6811 932205042685 DIO SIG SM BAV99LG (ONSE) R 3812 213811201103 RST SM 0805 RC05 10K PM5 R...
Page 91: Different Parts List
1608 823827732071 CABLE RING TERM/45/FAST AWG18 3501 232270260103 RST SM 0603 RC21 10K PM5 R Diversity of 200P7EB/00 compared with 200P7ES/00(LPL PANEL 2537 223878615649 CER2 0603 X7R 16V 100N PM10 R 3525 232270260223 RST SM 0603 RC21 22K PM5 R...
Page 92 Different parts list 200P7 LCD Go to cover page 3123 213811201103 RST SM 0805 RC05 10K PM5 R 3124 213811201102 RST SM 0805 RC05 1K PM5 R 3125 212211000354 RST MFLM MF1/2WS A 820R PM1 A 3127 232273461543 RST SM 0805 RC12H 15K4 PM1 R 3129 232273061513 RST SM 0805 RC11 51K PM5 R 3131 232273462492 RST SM 0805 RC12H 2K49 PM1 R...
Page 93: Updated Parts
According to the ECO-CA005956,Add QSG-ergo base and Jig on P.E. bag for 200P7,Following is the detail 1.Item 0129 Qty from 1to 2, and add new Item: 0142-313815524581- QUICK SET GUIDE-ERGO BASE 12NC Description 863900016914 200P7MG/00 863900016915 200P7MG/27 863900016916 200P7ES/00 863900016917 200P7EB/00 863900016918 200P7EB/27 863900016939 200P7EB/75 863900017084 200P7EG/00 863900017102 200P7EB/93...
Page 94 Updated Parts 200P7 LCD Go to cover page According to the ECO-CA006106,designer add LPL panel,following is the detail: 2318 223878615649 CER2 0603 X7R 16V 100N PM10 R 2319 223878615649 CER2 0603 X7R 16V 100N PM10 R 12NC Description 2320 223878615649 CER2 0603 X7R 16V 100N PM10 R 313815868041 SCALER ASSY 2321 223878615649...
Page 95 Updated Parts 200P7 LCD Go to cover page 2457 223878615649 CER2 0603 X7R 16V 100N PM10 R 3202 212211805656 RST SM 0603 RC0603 1K PM5 R 2501 223858619812 CER2 0603 Y5V 50V 100N P8020 R 232270260102 RST SM 0603 RC21 1K PM5 R 223891619849 CER2 0603 Y5V 25V 100N P8020 R 3203...
Page 96 Updated Parts 200P7 LCD Go to cover page 3251 212211805641 RST SM 0603 RC0603 68R PM5 R 3373 212211805643 RST SM 0603 RC0603 100R PM5 R 232270260689 RST SM 0603 RC21 68R PM5 R 232270260101 RST SM 0603 RC21 100R PM5 R 3252 212211805638 RST SM 0603 RC0603 33R PM5 R...
Page 97 Updated Parts 200P7 LCD Go to cover page 3528 212211805643 RST SM 0603 RC0603 100R PM5 R 4503 212211805631 RST SM 0603 JUMP. MAX 0R05 R 232270260101 RST SM 0603 RC21 100R PM5 R 232270296001 RST SM 0603 JUMP. MAX 0R05 R 3532 212211805669 RST SM 0603 RC0603 10K PM5 R...
Page 98 932222075668 IC SM AME1117BCGTZ (AME0) R 7405 932214794668 IC SM LM1117MP-3.3 (NSC0) R 863900016915 200P7MG/27 932216733668 IC SM LD1117S33 (ST00) R 863900016916 200P7ES/00 932222076668 IC SM AME1117CCGTZ (AME0) R 863900016917 200P7EB/00 7501 932200429685 TRA SIG SM BC857CG (ONSE) R 932202312685...
Page 99 Updated Parts 200P7 LCD Go to cover page Affected Sets 12NC Description 12NC Description 863900016916 200P7ES/00 1 313815868051 CPU ASSY 863900016917 200P7EB/00 2 313815868081 CPU ASSY 863900016918 200P7EB/27 3 313815868661 CPU ASSY 863900016939 200P7EB/75 863900017084 200P7EG/00 Action Item 12NC Description...
Page 100 313815569981 LABEL-CPU-EU 863900016914 200P7MG/00 From 313815569041 LABEL-CPU(LPL) 313815569991 LABEL- CPU-NA 863900016915 200P7MG/27 From 313815569061 LABEL-CPU(LPL) 863900016916 200P7ES/00 313815570001 LABEL-CPU-AU 863900016916 200P7ES/00 1, 2 From 313811709301 HEX CODE OF F/W(NO MATL REQ) 313811709302 HEX CODE OF F/W(NO MATL REQ) 863900016917 200P7EB/00...
Page 101 615 313811709303 HEX CODE OF F/W(NO MATL REQ) 863900016915 200P7MG/27 From 615 313811709312 HEX CODE OF F/W(NO MATL REQ) 863900016916 200P7ES/00 615 313811709313 HEX CODE OF F/W(NO MATL REQ) 863900016916 200P7ES/00 From 615 313811709352 HEX CODE OF F/W(NO MATL REQ)
Page 102: Revision List
200P7 LCD Go to cover page Manual 12NC Release Date Change Instruction 3138 106 10499 Mar-17-2006 Initial Release 3138 106 10499 Mar-29-2006 S/N definition changed(P26) 3138 106 10499 Apr-28-2006 Add QSG-ergo base and Jig on P.E. bag(P92) 3138 106 10499 May-12-2006 Customer Request and Solve the icon shift problem(P92)
Page 103: Power Diagram & C.b.a (200P7Mg/00)
Power Diagram(200P7MG/00) 200P7 LCD Go to cover page...
Page 104 Power C.B.A -1(200P7MG/00) 200P7 LCD Go to cover page...
Page 105 Power Power C.B.A-2 (200P7MG/00) 200P7 LCD Go to cover page...
Page 106 Power C.B.A -1(200P7MG/00) 200P7 LCD Go to cover page...
Page 107 4. When the HV circuitry is operating properly there is no possibility of an x- tube must be the same type as the original, including suffix letter, or a Philips radiation problem. High voltage should always be kept at the approved type.

This manual is also suitable for:

200p7eg/00 200p7eb/75 200p7eb/93 200p7mg/00 200p7eb/00 00p7eb/27

Philips 200P7ES/00 Service Manual

Service

General Product Specification

Quick Links

TABLE OF CONTENTS

Chapters

Related Manuals for Philips 200P7ES/00

Summary of Contents for Philips 200P7ES/00

This manual is also suitable for:

Table of Contents