Toshiba B-SP2D SERIES Owner's Manual page 8

Safety Precautions
• Be aware of the following precautions when using batteries. Otherwise
they could heat up, burst or burn.
Do not throw the battery into fire or heat it with a microwave or oven,
etc.
Do not load the battery with the electrodes reversed.
Do not connect the electrodes with metal objects like wire. Do not
carry or store the battery along with metal objects such as necklaces,
hairpins, etc.
Do not stick a needle into, hammer, step on, or drop the battery.
Do not solder the battery.
Do not leave the battery where the temperature is more than 60°
centigrade, such as inside a car or in direct sunlight.
CAUTION
• Keep away from flame or other sources of heat. Failure to do this
may cause fire or machine failure.
• Do not drop or shock the machine as this may cause machine
failure.
• During lightning, turn off and keep away from the machine
because of danger of electric shock and machine failure.
• Avoid locations subject to rapid change in temperature as this
causes condensation, causing electric shock or machine failure.
• Do not damage the print head, platen or strip roller with a sharp
object. Doing so may cause machine failure.
• Do not touch or contact the print head element with a metal object.
Doing so may cause machine failure.
• Use the specified media only. Failure to do this may cause machine
failure.
• Be sure to turn off the machine before replacing the battery, or
machine failure may occur.
Safety Precautions.p65
This indicates that there is the risk of personal injury
or damage to objects if the machines are improperly
handled contrary to this indication.
- vi -
6
EO1-33052
10/31/2005, 11:32 AM