Toshiba B-SP2D SERIES Owner's Manual page 40

10. GENERAL MAINTENANCE
4. Clean the print head element with a print head cleaner, cotton swab, or soft
cloth slightly moistened with ethyl alcohol.
NOTE: Please purchase the print head cleaner (P/No. 24089500013) from
your authorised TOSHIBA TEC service representative.
Print Head
Element
5. Wipe the cutter, platen, and strip roller with a soft cloth moistened with
ethyl alcohol. Remove dust or foreign substances from the internal parts
of the printer, if any.
6. Remove paper particles or stains from the feed gap sensor, black mark/
feed gap sensor, and the strip/batch sensor with a soft cloth.
Strip Roller
Section 10.p65
Soft Cloth
Cutter
Feed Gap Sensor
Black Mark/Feed
Gap Sensor
Platen
10- 2
2
EO1-33052
10.1 CLEANING
Strip/Batch
Sensor
10/31/2005, 11:45 AM