Toshiba B-SP2D SERIES Owner's Manual page 2

CE Compliance (for EU only)
This product complies with the requirements of EMC, Low Voltage and R&TTE Directives
including their amendments.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
"This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations."
"Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada."
VORSICHT:
• Schallemission: unter 70dB (A) nach DIN 45635 (oder ISO 7779)
• Die für das Gerät Vorgesehene Steckdose muß in der Nähe des Gerätes und leicht zugänglich
sein.
Some types of this product are equipped with a wireless communication device, such as, TEC-
BTM-R and TEC-WLM-R. Please be sure to read the enclosed Precautions for Handling of
Wireless Communication Devices before using this product.
IrCOMM (9-wire) is a trademark owned by Link Evolution Corporation and is used by TOSHIBA
TEC under lincense.
IrDA Protocol Stack Deep Core
Waste Recycling information for users:
Following information is only for EU-member states:
The crossed out wheeled bin symbol is used to indicate that the product must not be treated
as general household waste. By ensuring that this product is disposed of correctly you will
be helping to prevent potentially negative consequences for the environment and human
health, which could otherwise be caused by incorrect waste handling of this product.
For more detailed information about the take-back and recycling of this equipment, please
contact the supplier that provided you with the product in question.
< For EU Only >
TOSHIBA TEC Europe Retail Information Systems S.A.
Rue de la Célidée 33 BE-1080 Brussels
Conformity_TOSHIBA.p65
©
TM Link Evolution Corp. All right Reserved.
Copyright © 2006
by TOSHIBA TEC CORPORATION
All Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN
1
(for CANADA only)
10/31/2005, 11:19 AM