Assembly - Dimplex SOLCU Installation And Operating Instructions Manual

EN
4.2

Assembly

WARNING
Risk of electrical shock and fire if mounted in a damp environ-
ment!
Only mount the controller in an area where the ingress protection is

sufficient (see chapter 14 "Technical data").
4.2.1 Mounting the controller
CAUTION
Risk of injury and damage to the casing when drilling!
Do not use the casing as a drilling template.

Choose a suitable installation site.

Drill the upper fastening hole.

Screw in the screw.

Remove the upper casing.

Hang the case in the recess .

Mark the position of the lower fastening holes ‚,ƒ.

Remove the casing again.

Drill the lower fastening holes.

Re-hang the case in the recess .

Screw the case firmly using the lower fastening holes ‚ and ƒ.

Mount the upper casing.

730.138 | 08.1
9