Dimplex SOLCU Installation And Operating Instructions Manual page 72

Temperature difference controller 5 inputs, 2 outputs
Table of Contents

Advertisement

Heat quantity:
Factory
Adjustable
setting
down to
min.
Pulse value for recording flow rate with a pulse generator:
1 l/Imp
5 l/Imp, 10 l/Imp, 1 l/Imp, 10 Imp/l, 0 Imp/l, 50 Imp/l, 100 Imp/l, 00 Imp/l, 300 Imp/
l, 400 Imp/l, 500 Imp/l, 600 Imp/l, 700 Imp/l, 800 Imp/l, 900 Imp/l, 1000 Imp/l
Recording flow rate with Grundfos sensor type (Direct Sensor):
--
VFS 1 - 0, VFS  - 40, VFS 5 - 100, VFS 10 - 00
Glycol content:
40 %
0 %
Flow rate value for recording flow rate without a flow sensor:
Flow rate value for maximum pump speed:
--
0
Flow rate value for minimum pump speed:
--
0
Thermostat:
Factory
Adjustable
setting
down to
min.
Temperature controlled:
Switch-on temperature:
0 °C
0 °C
Switch-off temperature:
0 °C
0 °C
Time controlled:
--
00.00
7
Adjustable
Comment
up to max.
60 %
99
The flow rate value for the maximum pump speed
must be greater than the flow rate value for the
minimum pump speed.
99
The flow rate value for the maximum pump speed
must be greater than the flow rate value for the
minimum pump speed.
Adjustable
Comment
up to max.
180 °C
The on and off values can be set independently of
each other.
180 °C
3.59
Programming a time period which goes beyond
midnight (4.00) is not possible.
EN
730.138 | 08.1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Solcu2

Table of Contents