Dimplex SOLCU Installation And Operating Instructions Manual page 47

Display: 3.7.5 Display: 3.7.5
[...........] [...........]
Display: 3.7.6 Display: 3.7.6
[Time controlled] [Time controlled]
Display: 3.7.6.1 Display: 3.7.6.1
[.......................] [.......................]
on-off on-off
/ /
Display: 3.8 Display: 3.8
[Time function] [Time function]
Display: 3.8.3 Display: 3.8.3
EN
Defining limits for the heat target
: press button.

 
The display for setting the limit of the heat target appears.

SET: press button.

"max" flashes in the display (heat target's maximum value).

: set the maximum value.

SET: press button to confirm.

Activating time control
: press button.

The "Time controlled" display appears.

SET: press button.

 
Time control is activated.

: press button.

The display for setting the duration appears.

SET: press button.

 
The time value flashes in the display.

: set the time value.

SET: confirm the value and go to the next value.

The settings are saved.

NOTE
The switch-on time must always be before the switch-off time. There-
fore, when the switch-on value is being adjusted, the switch-off value
will also be changed to a later time if necessary. Adjusting the switch-off
value to a time before the switch-on value is blocked.
  7.3.9 Time function
This function allows a controller output to be controlled depending on
a pre-defined time range.
Setting the time window
"Functions" submenu selected, see "Selecting a function"
✓
(see chapter 7.3.1).
Time function activated, see "Activating a function" (chapter 7.3.1).
✓
Outputs selected, see "Selecting an output" (chapter 7.3.1).
✓
: press button.

 
The display for setting the duration appears.

SET: press button.

The time value flashes in the display.

: set the time value.

SET: confirm the value and go to the next value.

The settings are saved.

NOTE
The switch-on time must always be before the switch-off time. There-
fore, when the switch-on value is being adjusted, the switch-off value
will also be changed to a later time if necessary. Adjusting the switch-off
value to a time before the switch-on value is blocked.
730.138 | 08.1
47