Dimplex SOLCU Installation And Operating Instructions Manual page 41

[..................] [..................]
Display: 3.3 Display: 3.3
[Solid fuel boiler] [Solid fuel boiler]
T T ? ?
T T ? ?
[...]: 6 K [...]: 6 K
[...]: 3 K [...]: 3 K
Display: 3.3.3 Display: 3.3.3
[on] [on]
[off] [off]
EN
  7.3.4 Solid fuel boiler function
This function allows control of a pump for heating of a storage tank
using a solid fuel boiler.
When the temperature difference between the solid fuel boiler and the
storage tank exceeds the "on" value, the solid fuel boiler temperature is
above the "min" value, and the storage tank temperature is below the
"max" value, then the pump is switched on. The pump runs until the
temperature difference is lower than the "off" value, the solid fuel boiler
temperature falls below the "min" value, or the storage tank tempera-
ture reaches the "max" value.
Allocating inputs and setting storage tank/solid fuel
boiler temperature and switch-on/switch-off tempera-
ture difference
"Functions" submenu selected, see "Selecting a function"
✓
(see chapter 7.3.1).
Solid fuel boiler activated, see "Activating a function"
✓
(chapter 7.3.1).
Outputs selected, see "Selecting an output" (chapter 7.3.1).
✓
: press button.

The display for setting the temperature inputs and the switch-

on/switch-off temperature difference appears.
SET: press button.

 
"T" flashes in the display (storage tank temperature input).

: choose the desired input.

SET: press button to confirm.

"T" flashes in the display (solid fuel boiler temperature input).

: choose the desired input.

SET: press button to confirm.

The "on" value flashes in the display.

: set the "on" value.

SET: press button to confirm.

The "off" value flashes after confirmation of the "on" value.

: set the "off" value.

SET: press button to confirm.

The settings are saved.

730.138 | 08.1
41