Dimplex SOLCU Installation And Operating Instructions Manual page 45

T T ? ?
[...]: 20°C [...]: 20°C
/ /
[...]: 20°C [...]: 20°C
Display: 3.6.3 Display: 3.6.3
[on] [on]
[off] [off]
[...............] [...............]
/ /
Display: 3.6.4 Display: 3.6.4
[Time controlled] [Time controlled]
Display: 3.6.4.1 Display: 3.6.4.1
EN
Thermostat activated, see "Activating a function" (chapter 7.3.1).
✓
Outputs selected, see "Selecting an output" (chapter 7.3.1).
✓
: press button.

 
The display for setting the temperature input and the "on" and

"off" values appears.
SET: press button.

"T" flashes in the display (temperature input).

: choose the desired input.

SET: confirm the input.

The "on" value flashes in the display.

: set the "on" value.

SET: press button to confirm.

The "off" value flashes after confirmation of the "on" value.

: set the "off" value.

SET: press button to confirm.

The settings are saved.

NOTE
The "on" and "off" values must not be equal, as otherwise the thermostat
remains inactive.
Activating time control
: press button.

The "Time controlled" display appears.

SET: press button.

 
Time control is activated.

: press button.

The display for setting the duration appears.
 

SET: press button.

The time value flashes.

: set the time value.

SET: confirm the value and go to the next value.

The settings are saved.

NOTE
The switch-on time must always be before the switch-off time. There-
fore, when the switch-on value is being adjusted, the switch-off value
will also be changed to a later time if necessary. Adjusting the switch-off
value to a time before the switch-on value is blocked.
730.138 | 08.1
45