Dimplex SOLCU Installation And Operating Instructions Manual page 32

System 10: 1 collector array –
1 swimming pool in stand-alone operation
with external heat exchanger
Description of the solar function: The solar circuit pump R1 is switched
on as soon as the switch-on temperature difference between the collec-
tor array A1 (T1) and the swimming pool C1 (T) is reached. When the
switch-off temperature difference or a safety limit is reached, the solar
circuit pump R1 switches off again. The swimming pool pump is control-
led externally.
Loading strategy of solar circuit pump R1: In the factory, the load-
ing strategy is set to temperature differential control. This cannot be
altered.
Activating the system: see chapter 7.. "Selecting a system".
Terminal layout
N L N R1 N
n.c. n.c. n.c. n.c.
L L
n.c. n.c.
D1
T1
F1
R1
3
R2 1 2 3 4 5
X
n.c.
C1
T2
EN
 
Display: .3.3 Display: .3.3
A1: collector array A1: collector array
C1: swimming pool C1: swimming pool
D1: wire bridge D1: wire bridge
F1: external heat exchanger F1: external heat exchanger
R1: solar circuit pump R1: solar circuit pump
T1: collector sensor T1: collector sensor
T: sensor swimming pool T: sensor swimming pool
730.138 | 08.1