Chapter 4 Basic Setup; Router Mode; Switch To Router Mode; Administrator Setup Instruction - Sapido RB-1602 User Manual

Chapter 4
4.1

Router Mode

Under Router Mode, the 11n Mobile Router provides a Router/AP function. User can get IP
address assigned by ISP wired or wirelessly. It also supports NAT and DHCP functions that
enable multiple computers to share an Internet connection at the same time.
4.1.1

Switch to Router Mode

Switch to AP mode and plug in power.
Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 5 seconds
between power-off / power-on condition.
2. Switching the mode while power is on will make the router crush, and cause the hardware damage and
information lost.
4.1.2

Administrator Setup Instruction

Make sure to switch the mode into Router Mode, then open a Microsoft Internet Explorer,
Mozilla Firefox or Apple Safari browser, and enter
browser's blank.
Note: If the homepage doesn't appear, please check if the TCP/IP configuration is obtaining IP address
automatically or not. If you don't know how to do it, please refer to "1.5 Get your IP Automatically &
Manually".
http://www.sapido.com.tw/
Basic Setup
http://192.168.1.1
28
(Default Gateway) into
User Manual 1.0