Cage Assembly Instructions - Impex MARCY DIAMOND ELITE MD PWR-8 Owner's Manual

CAGE ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.
NOTE: It is strongly recommended this machine be assembled by two or more people to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Right Support (#5) to the Right Stabilizer (#1). Attach the Cross Brace (#3)
to the Right Support. Align the holes and secure them with two M10 x 3 ¾" Carriage
Bolts (#50), Ø ¾" Washers (#64), and M10 Aircraft Nuts (#66). Repeat the same step
to install the Left Support (#6) on the other side.
and Bolts yet.
B.) Cover the end of the Stabilizers with four 2" x 2 ¾" Stabilizer End Caps (#37).
NOTE: DO NOT tighten the Nuts
6
DIAGRAM 1