Microprocessor Update Procedure ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Adj-7; Update By Serial Terminal Cnnection - Panasonic PT-AE8000U Service Manual

2. Microprocessor update procedure
* The update is done by SERIAL terminal connection.
* During update, prevent PC from going into stand-by or shut down.
2. 1. Update by the SERIAL terminal connection
2. 1. 1. Equipment to be used
1. Computer : Use it for the transfer of update data.
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Firmware update tool : [PgSendORCA11.exe] Update tool is downloaded from the projector service homepage.
4. Microprocessor Software: Please download the file from the projector service homepage to the PC.
2. 1. 2. Preparation
1. Connect the RS-232C termanal of projector
and PC with a RS-232C cable.
2. 1. 3. Update procedure
1. Switch the projector to "Standby" mode (POWER indicator is Lighting in red).
2. Start up firmware update tool [ PgSendORCA11.exe ] with a computer.
3. Select language and click the [ OK ] button.
4. 1) Select the Serial Port of the computer.
2) Select the model number.
(Case of AT6000, select the AE8000.)
3) Select the CPU(Central Processing Unit) to update.
4) Click the [ PROGRAM LOAD ] button.
5. Appoint the microcomputer software that downloaded in a computer beforehand, and click the [ Open ] button.
Computer
RS-232C cable (Streight)
①
②
③
④
ADJ - 7
Projector