4. Unscrew the 1 screw and remove the M3-P.C.Board.
M3-P.C.Board
XTBT969FJK
2. 7. Removal of PBS Array / Iris Unit
1. Remove the Analysis block according to the section 2.4. "Removal of Optical Block / Analysis Block".
2. Unscrew the 5 screws and remove the Analysis case (upper).
* Can be removal of PBS Array.
Analysis case (upper)
3. Unscrew the 1 screw and remove the Integrator hold spring.
4. Unscrew the 2 screws and remove the Iris unit.
XTV3+10GFJ
XTBT969FJK
PBS array
XYN3+F10FJ
DIS-7
* The incidence polarizer is installed in
the Analysis case (upper).
Be careful not to shift the installation
position nor damage it.
XTBT969FJK
Integrator hold spring
Iris unit