Panasonic PT-AE8000U Service Manual page 13

Rotation check of Exhaust fan and Power fan (Displays "NG" when Fan is abnormal condition)
(17)-
* When detected abnormal temperature around the air intake port / air exhaust port / LCD block,
TEMP indicator turned on. If arriving at the critical temperature, the power supply will shut down
automatically (thermal shutdown) and the indicator will flash.
(18)- Lens memory operation abnormality check (Abnormal condition = "NG")
(19)- Judgment for Replacement Time of Lamp (Cumulative Usage more than 4000H is "NG")
* Warning of the lamp cumulative usage time and shutdown use the conversion time for LAMP POWER "NOMAL".
(20)- The number of times that carried out reset of "LAMP RUNTIME"
(21)- Cumulative usage time (conversion for LAMP POWER "NOMAL" time) and Number of LAMP ON times
"Current number : Last reset : Reset of last but one"
4.STATUS
・Display version of each software and each data.
STATUS
MODEL TYPE
SERIAL NUMBER
DYNAMIC GAMMA
UNIFORMITY
-------- SOFT VERSION --------
MAIN
SUB
IRIS
FPGA
FRC ID MAJOR
FRC ID MINOR
FRC CONFIG MAJOR 01000000
FRC CONFIG MINOR 00000000
-------- DATA VERSION --------
BITMAP
ENG FONT
RUS FONT
THA FONT
KOR FONT
CHI FONT
JPN FONT
ET7140 GAMMA
COLOR MANAGEMENT 1.01
x.v.Color
OD
DETAIL CLARITY
5.FLICKER ADJUST
・To enter the flicker adjustment mode.
Note: If replacing the optical parts (Optical block) or A-P.C.Board, adjust to flicker is minimum according to the
"SECTION 3 Flicker adjustment".
PT-AE8000U
SA*******
OK
OK
1.00
1.00
1.02
1.00
04000000
07000000
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.03
1.00
INF - 7