Impex Marcy Diamond MD-805 Owner's Manual page 8

STEP 3 (See Diagram 3)
A.) Attach the Leg Developer (#7) to the open bracket on the Front Post (#5). Secure it with
one M8 x 3 3/8" Allen Bolt (#37), two Ø 5/8" Washers (#42), and one M8 Aircraft Nut
(#40). Do not over tighten the Nut and Bolt. Make sure the Leg Developer is able to
swivel.
B.) Attach the Arm Curl Handle (#8) to the Leg Developer. Use the L-shaped Lock Pin
(#31) to secure the Handle.
C.) Remove the Arm Curl Handle when doing Leg Developer exercises.
7
DIAGRAM 3