Impex Marcy Classic MCB 880-MG Owner's Manual page 13

STEP 7 (See Diagram 7)
A.) Attach the Arm Curl Pad (#13) to the Arm Curl Stand (#7). Secure it with two M8 x ¾" Allen
Bolts (#33) and Ø 5/8" Washers (#40).
B.) Insert the Arm Curl Stand into the front opening on the Main Frame. Use a Lock Knob (#16)
to secure the Stand at desired height.
C.) The Leg Developer can be locked when doing sit up exercises. Simply pull the U-shaped Pin
(#10) out and drop into the hole on the Leg Developer. Remove the Pin when doing Leg
Developer exercises.
D.) Remove the Arm Curl Stand and Curl Bar Handle when using Leg Developer.
12
DIAGRAM 7