Table of Contents
Advertisement
Quick Links
NOTE:
Please read all instructions
carefully before using this
product
MARCY CLASSIC
Table of Contents
Safety Notice
MCB-252 COMBO BENCH
Hardware Identifier
W/120 lbs Weight Set
Assembly Instruction
Exploded Diagram
Parts List
Warranty
Ordering Parts
Model
MCB-252
Retain This
Manual for
Reference
100302
OWNER'S
MANUAL
®
IMPEX
INC.
2801 S. Towne Ave., Pomona, CA 91766
Tel: (800) 999-8899 Fax (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
Advertisement
Table of Contents
Related Manuals for Impex MARCY CLASSIC MCB-252
Summary of Contents for Impex MARCY CLASSIC MCB-252
- Page 1 NOTE: Please read all instructions carefully before using this product MARCY CLASSIC Table of Contents Safety Notice MCB-252 COMBO BENCH Hardware Identifier W/120 lbs Weight Set Assembly Instruction Exploded Diagram Parts List Warranty Ordering Parts Model MCB-252 Retain This Manual for...
-
Page 2: Table Of Contents
EXPLODED DIAGRAM....................PARTS LIST......................…. WARRANTY......................…. ORDERING PARTS....................…. BEFORE YOU BEGIN Thank you for selecting the MARCY CLASSIC MCB-252 COMBO BENCH ® w/120 lbs weight set by IMPEX INC. For your safety and benefit, read this manual carefully before using the machine. -
Page 3: Important Safety Notice
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. -
Page 4: Warning Label Placement
WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Cross Brace. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown. -
Page 5: Hardware Pack
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size. -
Page 6: Assembly Instructions
ASSEMBLY INSTRUCTION Tools required for assembling the machine: Two Adjustable Wrenches. NOTE: It is strongly recommended that two or more people assemble this equipment to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#2) in the mid-span. Secure them with two M10 x 2 ¾”... - Page 7 STEP 2 (See Diagram 2) A.) Connect the Front Stabilizer (#5) to the Main Seat Support (#3) and secure them with three M8 x ¾” Hex Bolts (#41) and three Ø 5/8” Washers (#45). DO NOT tighten the Bolts yet. B.) Connect the Main Seat Support to the Cross Brace (#2).
- Page 8 STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#9) to the open bracket on the Front Stabilizer (#5). Secure it with one M10 x 2 ¾” Hex Bolt (#38), one Ø ¾” Washer (#44), and one M10 Aircraft Nut (#47).
- Page 9 STEP 4 (See Diagram 4) A.) Attach the Backrest Supports (#14) onto both ends of the Pivot on the Main Seat Support (#3). Rest the other end against the Backrest Adjustment Bar (#8). B.) Place the Backrest Board (#17) onto the Backrest Supports. Secure it with four M6 x 1 ½”...
- Page 10 STEP 5 (See Diagram 5) A.) Wrap the ball end of the Cable around the Pulley (#30). Place the Pulley in the open slot on the Lat Bar Frame (#12). Secure it with one M10 x 2” Hex Bolt (#40), two Pulley Bushings (#29), and one M10 Aircraft Nut (#47).
-
Page 12: Parts List
PARTS LIST KEY NO. DESCRIPTION QUANTITY Rear Upright Beam Cross Brace Main Seat Support Diagonal Support Front Stabilizer Bracket Grip Backrest Adjustment Bar Leg Developer Foam Tube Weight Holder Lat Bar Frame Lat Bar Backrest Support Arm Curl Stand Weight Storage Post Backrest Board Seat Pad Arm Curl Pad... -
Page 13: Limited Warranty
® IMPEX INC. LIMITED WARRANTY ® IMPEX Inc. ("IMPEX ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase.