Ocseq - Set Outside Call Sequence; Page - Page; Park - Park (#); Park - Call Park To Other Extension (!) - Avaya IP Office 5610 User Manual

Page 46 - Function Key Programming

OCSeq - Set Outside Call Sequence

Sets the ringing pattern (sequence) used for internal calls.
This function is currently not supported on the 2420 telephone.

Page - Page

Page the specified target extension or group. The target must be capable of hands-free
speech.
This function requires the target extension or group number to be specified when
programmed. The target is then shown next to
programmed through the phone by the user.
[User | Digital Telephony | Advanced | Dial | Dial Paging]
See also:
• GrpPg - Group Paging (!)on page 41.

Park - Park (#)

Park calls to and retrieve calls from a specific park slot.
This function requires entry of a park slot number when programmed. That number and
Park then appears next to the
phone by the user using an
The user can use the
slot. Parked calls can also be retrieved with the Ride function (see page 51).
When a call is parked in that park slot by the user, a
key and parked by another user, then Park is underlined.
[User | Digital Telephony | Park]
See also:
• CPark - Call Park (!) on page 35.
• Park - Call Park to Other Extension (!) on page 46.
• Ride - Ride Call on page 51.

Park - Call Park to Other Extension (!)

Allows a call to be parked against another extension. Depending on the other
extension's type, its parked call indication is triggered. Parked calls are retrieved with
the Ride function (see page 51).
This function can be programmed with or without a target extension number. This
function can be programmed through the phone by the user using an
If programmed with a number, the
a call, pressing
If programmed without a number, after pressing
must be entered.
The parked call is assigned a number based on the parking extensions number. For
example, extension 290's first parked call is numbered 2900, it's next 2901 if 2900 is
still parked and so on. If not retrieved elsewhere, a parked call will recall to the parking
extension after a set time.
[User | Digital Telephony | Emulation | Call Park to Other Extension]
See also:
• CPark - Call Park (!) on page 35.
• Park - Call Park to Other Extension (!) on page 46.
• Ride - Ride Call on page 51.
Page 46 - Function Keys
Function Key Programming
key. This function can be programmed through the
Admin 1 key.
key to park calls into that park slot and unpark calls from that
Park key displays that number. After answering
Park parks the call against that extension.
40DHB0002USFG – Issue 1 (9th February 2005)
Page. This function cannot be
symbol appears next to the
Park the target for the parked call
IP Office 5610 User's Guide
Function Keys
Admin key.