Shorthand Programming Mode - Avaya IP Office 5610 User Manual

Function Key Programming

Shorthand Programming Mode

1. Press
2. The Admin or Admin1 menu appears as follows:
Admin Pages
With the exception of Expl?, the names shown are the features that you can assign
to soft keys. When Admin has been selected you can display the full name of the
feature by pressing Expl?. (see Longhand Programming on page 30).
Admin1 Page
3. On the Admin pages, use the
4. When the function required is shown, press the
5. If the function requires some data to be entered, [ is shown at the bottom of the
display. Enter the data using the normal telephone keypad.
6. The upper part of the display reverts to showing the functions currently assigned to
each
7. Select the display key against which to program the new function by pressing that
CAUTION: Do not select the slot used for the Admin function. Replacing this
8. If the display slot is not already used, the display shows BUTTON PROGRAMMED!.
•
•
9. If the display slot already has a programmed function, the display shows FEATURE
ON BUTTON.
•
•
•
IP Office 5610 User's Guide
40DHB0002USFG – Issue 1 (9th February 2005)
Admin or Admin 1. See Function Key Programming on page 28.
and key.
or key.
function will lock the phone for further programming until reset through
the telephone system by your System Administrator.
Press EXIT to end programming
or
Press Cont to continue programming other functions.
Press Repla to replace that existing function with the one just programmed.
The display then shows BUTTON PROGRAMMED! As in step 8 above.
Press Keep to keep the existing function and forget the function just
programmed.
Press Delete to delete the existing function and forget the function just
programmed.
and keys to move through the list of features.
key adjacent to its name.
Function Keys - Page 29
Function Keys - Page 29
Function Key Programming