8.6
INSTALLING A ThERmOSTAT
An optional millivolt thermostat is available to help keep the room temperature constant.
NOTE: The thermostat must be installed by a qualified installer.
●
Disconnect the power supply.
8.6.1
●
Remove the right side panel to gain access to the rear of the control panel.
8.6.2
●
Strip and connect the thermostat wires to the green screw terminals on the back of the control panel.
8.6.3
GREEN SCREW
TERMINALS
NOTE: The control must be in either T-STAT or AUTO to control the heater with a thermostat.
fIGure 8.6
31
TP - INSTAllING A ThERmOSTAT_PEllET
W415-0702 / 10.30.08