Furuno 1833 Installation Manual page 40

5. For GP-310B/320B, press the RETURN soft key twice to show SYSTEM CONFIG
menu.
6. Press the SYSTEM SETUP soft key followed by PORT SETUP and GPS/NMEA PORT
soft keys.
7. Select FURUNO GPS SENSOR, and press the [ENTER] knob or EDIT soft key to show
FURUNO GPS SENSOR window.
8. Select YES and press the [ENTER] knob or ENTER soft key.
9. Press the RETURN soft key three times followed by NAV OPTIONS, GPS SENSOR
SETTINGS soft keys to show the GPS SETUP menu.
10. Select LOCAL TIME OFFSET and press the EDIT soft key.
11. Enter time difference between local time and UTC time. Use the + <- - > - soft key to
switch from plus to minus and vice versa. And then press the [ENTER] knob or ENTER
soft key.
12. Select ANTENNA HEIGHT and press the EDIT soft key.
13. Enter the height of the GP-310B/320B antenna unit above sea surface. Use the trackball
to select digit and rotate the [ENTER] knob to set value. The default height is 5 m.
14. Press the [ENTER] knob or ENTER soft key.
15. Choose and set other items as appropriate, referring to the table on the next page.
3-12
LOCAL TIME OFFSET
+00:00
GEODETIC DATUM
WGS-84
POSITION SMOOTHING
000 second(s)
SPD/CSE SMOOTHING
005 second(s)
GPS SPEED AVERAGE
060 second(s)
LATITUDE OFFSET
0.000'N
LONGITUDE OFFSET
0.000'E
DISABLE SATELLITE
_ _ _ _ _ _
LATITUDE
45 35.000' N
LONGITUDE
125 00.000' W
ANTENNA HEIGHT
005m
GPS FIX MODE
2D/3D
COLD START
NO
GPS SETUP menu
ANTENNA HEIGHT
005 m
Antenna height window
GPS
SETUP
EDIT
GPS
STATUS
RETURN