Furuno 1833 Installation Manual page 26

Power cable
Connect the power cable to the POWER connector.
Signal cable connection (from the antenna unit)
Connect the signal cable to SIGNAL connector.
Ground terminal
Connect the ground wire (local supply, IV-2sq) between the ground terminal and ship's
ground.
DATA1 to DATA3
Other equipments can be connected here as shown below.
DATA1 (7P)
NMEA (IN/OUT)
GPS sensor GPS-310B/320B,
Navaid, sounder etc.
This equipment can receive the following NMEA 0183 format sentence from an other
equipment.
• Own ship's position:
• Ship's speed:
• External waypoint:
• Heading (True):
• Course:
• Depth:
• Temperature:
• Time:
• Other ship's information:
• Insight satellite information:
• Target L/L
You will need the optional NMEA cable to connect with other equipment.
2-2
DATA2 (6P)
Heading sensor
(ex. SC-60/120)
GGA>RMC>RMA>GLL
RMC>RMA>VTG>VHW
RMB>WPL>BWR>BWC
HDT>HDG>HDM
RMC>RMA>VTG
DPT>DBT
MTW
ZDA
TTM
GSV
TLL
DATA3 (7P)
NMEA IN, NMEA OUT for PC
External buzzer
PC