Stopping The Engine; Clutch Control Fr 2113, Fr2116 - Jonsered FR 2111 Operator's Manual

WARNING!
Do not use the Rider on ground
that slopes more than 15°. Mow
upwards and downwards on
slopes, never sideways. Avoid
sudden changes in direction.
Starting on slopes, manual gearbox
1. Press down the parking brake
2. Move the throttle to full throttle.
3. Disengage the engine and select 1st gear.
4. Gradually release the clutch pedal.
5. When the engine starts to pull, release the
parking brake.

Stopping the engine

Preferably let the engine idle for a minute so it runs
at its normal working temperature before it is
stopped if it has worked hard.
1. Lift up the mowing deck by pulling the lever
backwards to its end position.
2. FR 2111: Pull back the throttle and move the
gear shift lever to the neutral position N, without
pressing in the reversing lock button.
Turn the ignition key to the STOP position.
FR 2113, FR 2116: Pull back the throttle and
turn the ignition key to the STOP position.
3. When the Rider is at a standstill, hold down the
parking brake and press in the reversing lock
button.

Clutch control FR 2113, FR2116

The clutch control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
20
– English
DRIVING
MAX 15°
6007-013
8009-249
STOP START
8009-258
8009-259