Samsung CLP-550 Setup Manual page 74

2.20
U C
SING THE ONTROL
Item
AppleTalk
Netware
Config Netware
IPX Frame Type
P
ANEL
Explanation
Values: On*, Off
This item lets you select whether or not
you use the AppleTalk protocol. Select
On to use the protocol
Options: On*, Off
You can select whether or not you want
to use the Netware protocol.
If you select On, you can access the
Config Netware menu item.
In the Config Netware menu, you can
specify the frame type parameter used
on your network.
Options: Yes, No*
You can set this item only when you set
Netware to On. This item lets you
select whether or not you set the frame
type parameter. Select Yes to select
the frame type.
If you select Yes, the IPX Frame
Type option appears on the display.
Values: Auto*, EN_8023, EN_II, EN_8022,
EN_SNAP
You can select this item only when you
set Config Netware to Yes. This item
lets you select IPX Frame Type.
• Auto: You can set the frame type
automatically.
• EN_8023: Select this value to use the
IEEE 802.3 frame type.
• EN_II: Select this value to use the
ETHERNET II frame type.
• EN_8022: Select this value to use the
IEEE 802.2 frame type.
• EN_SNAP: Select this value to use the
SNAP frame type.