Common Windows Problems - Samsung CLP-550 Setup Manual

Message
Tray2 Jam
Cover Open
Waste Motor
Error
Waste Toner Tank
Full/Not Install
Problem
"File in Use" message
appears during installation.
"Error Writing to LPTx"
message appears.
"General Protection Fault",
"Exception OE", "Spool32",
or "Illegal Operation"
messages appear.
"Fail To Print", "A printer
timeout error occurred."
message appear.
7.30
S P
OLVING ROBLEMS
Status
Tray2 jam cover is open.
A problem has occurred
in waste toner motor.
The waste toner
container is full.

Common Windows Problems

Exit all software applications. Remove all software from the
StartUp Group, then restart Windows. Reinstall the printer
driver.
• Ensure that the cables are connected correctly and that
the printer is on.
• If bi-directional communication is not turned on in the
driver, it will also cause this message.
Close all other applications, reboot Windows and try
printing again.
This message may appear during printing. Just keep
waiting until it finishes printing. If the message appears in
standby mode or after printing is completed, check the
connection and/or whether an error occurred.
N : Refer to the Microsoft Windows 9x/Me/NT 4.0/2000/XP
OTE
User's Guide that came with your PC for further information on
Windows error messages.
Close Tray2 cover firmly.
Contact a service representative.
Replace the waste toner container
with a new one. See page 6.11.
Possible Cause and Solution
Do this...