Samsung CLP-550 Setup Manual page 252

E.8
U Y P
SING OUR RINTER ON A
7
Press the Enter button (
8
Press the On Line/Continue button (
ready mode.
Configuring TCP/IP
Your printer can be set up on a variety of TCP/IP networks. There
are several ways in which your printer can be assigned a TCP/IP
address, depending on your network.
• Static Addressing: TCP/IP address is assigned manually by
the system administrator.
• Dynamic Addressing BOOTP/DHCP(default): TCP/IP address
is assigned automatically by the server.
Static Addressing
To enter the TCP/IP address from your printer's control panel,
take the following steps:
1
In ready mode press the Menu button (
'Network' on the bottom line of the display. Press the Enter
button ( ) to access the menu.
2
Press the Enter button (
on the bottom line.
3
Press the scroll button (
the Enter button (
4
Press the Upper Level button (
button ( ).
5
Press the Enter button (
6
Press the scroll button (
the Enter button (
7
Press the Upper Level button (
button ( ).
8
Press the Enter button (
9
Press the scroll button (
press the Enter button (
N
ETWORK
) to save the selection.
) when 'Config Network' displays
or ) to display 'Yes' and press
).
), then use the scroll
) when 'Config TCP' displays.
or ) to display 'Yes' and press
).
), then use the scroll
) when 'IP Get Method' displays.
or ) to display 'Static' and
).
) to return to
) until you see