Using Windows Postscript Driver; Installing Ps Drivers - Samsung CLP-550 Setup Manual

B.2
U W
SING INDOWS

Installing PS Drivers

PPDs, in combination with the PostScript driver, access the
printer features and allow the computer to communicate with
the printer. An installation programme for the PPDs is provided
on the supplied software CD-ROM.
Before installing, make sure that the printer and the PC are
properly connected with parallel, USB or network interface. For
information about:
• connecting with the parallel interface.
• connecting with the USB interface. For Windows 98/Me, the
USB driver must be installed.
• connecting with a network interface. For a CLP-550, you need
to install an optional network interface card; see "Installing a
Network Interface Card" on page F.8.
Installing PS Drivers
1
Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, type x:\setup.exe in the
Open box (where x is the drive letter for the CD-ROM drive)
and click OK.
N : When the following window opens, connect your printer to
OTE
the computer and turn the printer on. Then click Next.
If the printer is already connected and turned on, this screen does
not appear. Skip to the next step.
P S D
OST CRIPT RIVER