Samsung CLP-550 Setup Manual page 197

Message
Replace [Color]
Toner
Replace Fuser
Replace Fuser Soon
Replace
Imaging Unit
Replace Imaging
Unit Soon
Replace MP
Roller
Replace
Transfer Belt
Replace Transfer
Belt Soon
Replace
Transfer Roller
Replace Transfer
Roller Soon
Replace Tray1
Roller
Replace Tray2
Roller
Transfer Belt
Error
Tray2 Error
Status
The corresponding toner
cartridge in your printer
is empty.
The lifetime of the fuser
is done.
The lifetime of the fuser
is nearly done.
The lifetime of the
imaging unit is done.
The lifetime of the
imaging unit is nearly
done.
The lifetime of the MP
pickup roller is done.
The lifetime of the
transfer belt is done.
The lifetime of the
transfer belt is nearly
done.
The lifetime of the
Transfer Roller is done.
The lifetime of the
Transfer Roller is nearly
done.
The lifetime of the Tray1
pickup roller is done.
The lifetime of the Tray2
pickup roller is done.
The transfer belt is
either not working or
not correctly installed in
the printer.
Optional Tray2 is not
properly installed or
connected to the printer.
Do this...
Replace the corresponding toner
cartridge with a new one. See
page 6.8.
Contact a service representative.
When "Replace Fuser" appears on
the display, replace the fuser.
Replace the imaging unit with a
new one. See page 6.14.
When "Replace Imaging Unit"
appears on the display, replace the
imaging unit.
Contact a service representative.
Replace the transfer belt with a
new one. See page 6.22.
When "Replace Transfer Belt"
appears on the display, replace the
transfer belt.
Contact a service representative.
When "Replace Transfer Roller"
appears on the display, contact a
service representative.
Contact a service representative.
Contact a service representative.
Replace the transfer belt.
OR
Make sure the installed transfer
belt is properly seated.
After turning the printer off and
then back on, reinstall the optional
tray2. If the message persists,
contact a service representative.
S P
OLVING ROBLEMS
7
7.29