To remove the icemaker:
1.
Remove the Ice bucket. (See
2.
Remove the Phillips-head screw that attaches
the front of the wire harness cover.
Wire Harness Cover
3. Using a small fl at blade screwdriver, pry the
front of the cover out, then pull the cover
towards the front of the refrigerator.
4. Note the routing of the icemaker wire harness,
.)
Ice Bucket
5. Push in the release tab on the front of the
Note: When installing icemaker, engage key slots in
key tabs before pushing icemaker in place.
– 60 –
then disconnect the harness.
icemaker, then pull the icemaker out of the ice
room.
Icemaker
Key Tab
Key Slot
Disconnect
Release Tab
Key Tab
Key Slot