GE Profile PFSS6NKW Technical Service Manual page 17

LEVEL THE REFRIGERATOR DOORS
9
Remember a level refrigerator is necessary
for getting the doors perfectly even. If you
need help, review the previous section on
leveling the refrigerator.
When
the left
door is
lower
than the
right
door.
Adjustment
point
If you open the freezer door, you can see
A
the center hinge.
B Insert the supplied 4 mm Allen wrench
into the shaft of the center hinge.
LEVEL THE REFRIGERATOR
9
DOORS
(cont.)
Adjust the height by turning clockwise
C
or counterclockwise. When you turn
counterclockwise, the door will move up.
D After adjusting the doors, please insert the
supplied fastener ring using a pair of pliers
in the gap between the hinge grommet and
the center hinge. The number of fastener
rings you will need to insert depends on
the gap.
NOTE: Four fastener rings are enclosed
with the refrigerator. Thickness of each
fastener ring is 0.04".
LEVEL THE FREEZER DOOR
10
When
the left
door is
higher
than the
right
door.
Adjustment
Locate the height adjuster in the freezer
A
point
door. Slightly loosen the four Phillips-
head screws from the door on each side
(right and left).
Loosen the controller screw with a
B
Phillips-head screwdriver to adjust the
level.
– 17 –
(Continued next page)