GE Profile PFSS6NKW Technical Service Manual page 35

3. Remove the 2 Phillips-head screws that hold
the LED light housing to the ceiling of the
refrigerator.
4. Disconnect the LED light and the sensor wire
harnesses.
5. Remove the 2 Phillips-head screws and the LED
board.
Fresh Food Evaporator Cover
The fresh food evaporator cover is held to the back
wall of the refrigerator with a Phillips-head screw
and 2 tabs.
fresh food evaporator cover
To remove the
1. Remove the 2 fruit and vegetable drawers and
the shelves that are in front of the evaporator
cover.
2. Using a small fl at blade screwdriver, pry off the
cap from the top of the shelf angle.
Cap
3. Remove the 2 Phillips-head screws that attach
the shelf angle to the cover.
4. Remove the 2 Phillips-head screws that hold the
evaporator cover to the back wall.
Shelf Angle
– 35 –
:
(Continued next page)