Slide The Left Base Cover Onto The Left Upright; 89), And Slide The Right Base Cover Onto The; Right Upright (90). Do Not Press The Base - Pro-Form ZT8 User Manual

6. Identify the Left and Right Base Covers (82, 83).

Slide the Left Base Cover onto the Left Upright

(89), and slide the Right Base Cover onto the

Right Upright (90). Do not press the Base

Covers into place yet.
Slide the Left and Right Upright Covers (84, 85)
onto the Left and Right Uprights (89, 90).
7. There may be ties securing the Cage Nuts (5)
in the Handrails (86, 87). Remove the ties and
make sure the Cage Nuts are in place.
Remove and discard the four indicated screws
(B).
Hold the Right Handrail (87) near the Right
Upright (90). Route the Upright Wire (81)
through the bottom of the Handrail and out the
front.
Attach the Right Handrail (87) to the Right
Upright (90) with two 5/16" x 1" Flat Head
Screws (28), a 5/16" x 1" Screw (8), and three
5/16" Star Washers (11). Do not fully tighten
the Screws yet.
Attach the Left Handrail (86) to the Left
Upright (89) in the same way.
6
89
84
82
7
5
B
8
86
11
89
12
90
5
11 B
28
87
90
85
83
81
Tie
8
11