Pro-Form ZT8 User Manual page 18

18. Attach the upper end of the Storage Latch (53)
to the bracket on the Latch Crossbar (38) with an
M8 x 50mm Bolt (3) and an M8 Nut (12).
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 28).
19. Firmly tighten the six 3/8" x 4" Screws (7) (only
one side is shown).
Press the Left and Right Base Covers (82, 83)
onto the Base (94).
20. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the  oor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see pages 30 and 31).
18
12
56
19
82
18
38
3
53
94
83
7