6-1 Basic Automatic Editing
6-1-9 Performing Automatic Editing
Overview
Once you have set the necessary edit points, the
AUTO button lights up to show that the VTR is ready
for automatic editing.
Preroll point
.
Recorder VTR
Preroll
Playback mode
Player VTR
a) Preroll time: Factory-set to 5 seconds. Can be set from 0 to 30
seconds, in 1-second steps, through the SET UP menu.
b) The post-roll time can be set between 0 and 30 seconds in units
of seconds using the SET UP menu.
c) Over-recording time: 2 seconds.
6-12
Chapter 6 Editing
IN point
$
a)
Assemble editing
Insert editing
Playback mode
Tape movement during automatic editing
During automatic editing, the tape in the recorder VTR
and the player VTR move as shown in the diagram
below.
OUT point
Post-roll point
$
b)
Post-roll
Over-
c)
recording
Stop
.
Stop