Mode Controls (Flame, Blower, Light); Flame Height; Blower Speed - Lopi 6015 HO Owner's Manual

12

Mode Controls (Flame, Blower, Light)

Press the Mode button to cycle through the four mode controls (see Figure 9 below).
Look here for
mode controls.

Flame Height

Flame height may be controlled using the UP and DOWN buttons when in Flame Height Mode (see
Figure 10 below). The center display will display the 7 settings, from "OFF" to "HI" for full on.
NOTE: Flame height may not be adjusted if operating in Smart Thermostat mode.
When in flame height
mode, this icon will
appear darkened.

Blower Speed

The blower may be controlled using the up and down buttons when in Blower Speed mode (see Figure
11). The center display will display the 7 settings, from "OFF" to "HI" for full on.
When in blower
mode, this icon will
appear darkened.
MANUAL MODE – BLOWER OPERATION
When in Manual mode the blower will remain on, even if the burner is turned off and the heater cools.
Either manually turn the blower off, or turn off the heater by pressing the On/Off button.
© Travis Industries
Operation
F
OFF
F
This is the flame height
OFF
read-out. Use the up or
down buttons to adjust
the flame height (7
settings).
MAX
F
This is the blower
OFF
speed read-out. Use
the up or down buttons
to adjust the blower
speed (7 settings).
MAX
Press the mode button to cycle through the mode settings.
Figure 9
Figure 10
Figure 11
4131220
Flame
Height
Accent
Light
Optional
Blower
High
Medium
Off
High
Medium
Off
100-01371