Adjusting The Flame Height; Adjusting The Blower Speed - Lopi ProBuilder 36 CleanFace GSB2 Manual

8

Adjusting the Flame Height

This fireplace has an adjustable flame to tailor the look and heat output to your specific needs. It is
adjusted by turning the flame adjust knob.

Adjusting the Blower Speed

The blower helps transfer heat from the heater into the room. It will not turn on until the heater is up to
temperature (approximately 10 minutes after starting). See the illustration below for instructions on
adjusting the blower speed.
© Travis Industries
Operation
5/4/21 - 1502 PB 36 CF Operation (Aust)