Procedure For Hardware Installation - D-Link DI-713 User Manual

2.1.2. Rear Panel
Ports:
Port
ON/OFF
DC IN
COM

2.2 Procedure for Hardware Installation

1. Decide where to place your Wireless Broadband Router:
You can place your Wireless Broadband Router on a desk or other secure surface, or
you can mount it on a wall. For optimal performance, place your Wireless Broadband
Router in the center of your office (or your home) in a location that is away from any
potential source of interference, such as a metal wall or microwave oven. This
location must be close to power and a network connection.
REV: 11062000
Figure 2-2 Rear Panel
Power switch
Power inlet (DC 5V)
Serial port (connect analog modem or console cable)
Description
5