Download Print this page

D-Link DI-711 Quick Install Manual

D-link di-711: install guide
Hide thumbs Also See for DI-711:

Advertisement

Quick Links

1 1
Connecting the DI-711 Wireless Router to
Connecting the DI-711 Wireless Router to
your network
your network
When you have completed the steps in this installation guide, your connected
First,
Plug in the power supply as shown.
The Power LED will turn on
to indicate proper operation.
DI-711.03.01.01
network may look someting like this:
Analog Modem
LAN port
Hub/Switch
DFE-530TX+
Quick Install Guide
Quick Install Guide
Wireless Broadband Router
WAN port
DI-711
DWL-120
DI-711
Internet
Cable/DSL
Modem
Wireless
Networking
DWL-650
DWL-500

Advertisement

loading

Summary of Contents for D-Link DI-711

  • Page 1 Quick Install Guide Quick Install Guide DI-711 Wireless Broadband Router Connecting the DI-711 Wireless Router to Connecting the DI-711 Wireless Router to your network your network When you have completed the steps in this installation guide, your connected network may look someting like this:...
  • Page 2 Installing the DI-711 using the Setup Wizard Wizard Checking the IP Address of the computer being used to configure the DI-711 Wireless Router Go to Start>Run Type in “WINIPCFG”. The IP address of the computer must be between 192.168.0.2 and 192.168.0.254 in order to configure...
  • Page 3 Installing the DI-711 using the Setup Installing the DI-711 using the Setup Wizard Wizard continued continued Open the web browser, and type 192.168.0.1 into the URL address box. Note: Please disable any proxy server set- ting for the web browser.
  • Page 4 Installing the DI-711 using the Setup Installing the DI-711 using the Setup Wizard Wizard continued continued The default IP address of the LAN port is set to 192.168.0.1. Click Next to accept the default set- tings. By default, the WAN port is set to automatically obtain an IP address from the ISP.
  • Page 5 Installing the DI-711 using the Setup Installing the DI-711 using the Setup Wizard Wizard continued continued The DI-711 default wireless settings will work out of the box with any other D-Link Air products. Click Next to accept the default set- tings.
  • Page 6 Checking the connection to the Internet Checking the connection to the Internet To check the connection, open the web browser and go to your favorite website. If you are unable to browse, please do the following: 1. Refer to Appendix B to check your connection to the wireless router.
  • Page 7: Assigning A Static Ip Address

    Go to START>RUN Type “command” in the box. Click OK. Type “ping 192.168.0.1”, which is the IP address of the LAN port of the Broadband Router. Hit the “Enter” key. A successful connection will show four replies, as show at left. di-711.03.02.01...